Space Technology Assembly

Photos of technicians working on NASA's space launch systems, showcasing advanced engineering and assembly processes in well-equipped facilities.

Detail, snapshot of a paper mill Detail, snapshot of a paper mill

CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-2 at NASAs Kennedy Space Center in Florida, technicians monitor the progress as a large crane carries the remote manipulator system (RMS) robotic arm that was removed from space shuttle Atlantis payload bay. The RMS will be transported to NASAs Johnson Space Center in Houston for possible use on future spaceflights. The work is part of the Space Shuttle Programs transition and retirement processing of shuttle Atlantis. The shuttle is being prepared for display at the Kennedy Space Center Visitor Complex.

NASA, Boeing Complete Barrel Sections for future SLS Exploration Upper Stage Structural Test Article. These images and videos show technicians at NASAs Michoud Assembly Facility in New Orleans examining and lifting midbody barrels for the Exploration Upper Stage (EUS) structural test article of the SLS (Space Launch System) rocket in May 2023.The barrel sections make up the body, or main structure, of the future in-space propulsion stage for the mega rocket. The Exploration Upper Stage will be used on the second configuration of the SLS rocket, known as Block 1B, and will provide in-space propulsion to send astronauts in NASAs Orion spacecraft and heavy cargo on a precise trajectory to the Moon. Beginning with Artemis IV, EUS will replace the interim cryogenic propulsion stage for the Block 1 configuration of SLS. It has larger propellant tanks and four RL10 engines, enabling SLS to launch 40% more cargo to the Moon along with crew. EUS flight hardware is in early production at Michoud

. Crews at NASAs Michoud Assembly Facility in New Orleans load alluminum alloy panels into the Vertical Weld Center June 1. The Vertical Weld Center is a friction-stir weld tool for the large structures of the core stage for the SLS (Space Launch System) rocket. Teams load the panels into the VWC using an overhead crane system, then multiple panels are welded together to create entire barrels. The panels in these images are some of the five barrels that will form the SLS liquid hydrogen propellant tank for the SLS rocket that will power NASAs Artemis IV mission, which is also the first flight of SLS in its more powerful Block 1B configuration.The SLS core stage is made up of five unique elements: the forward skirt, liquid oxygen tank, intertank, liquid hydrogen tank, and the engine section. The liquid hydrogen propellant tank holds 537,000 gallons of liquid hydrogen cooled to minus 432 degrees Fahrenheit and sits between the core stages intertank and engine section. The liquid hydrogen

This image depicts a high angle view of technicians working on the instrument unit (IU) component assembly for the SA-8 mission in Marshall Space Flight Center's building 4705. A thin, circular structure, only 1-meter high and 7.6 meters in diameter, the IU was sandwiched between the S-IV and Apollo spacecraft. Packed inside were the computers, gyroscopes, and assorted black boxes necessary to keep the launch vehicle properly functioning and on its course.

CAPE CANAVERAL, Fla. - In the Horizontal Integration Facility at Launch Complex 37 on Cape Canaveral Air Force Station in Florida, a worker stands with his head inside the first stage of a Delta IV rocket as he performs tasks to secure it to the second stage, at left.This United Launch Alliance Delta IV rocket is slated to launch GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Launch is targeted for Feb. 25.

Detail, snapshot of a paper mill Detail, snapshot of a paper mill

Interior View of Orbiter Processing Facility 3

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, the remote manipulator system, or RMS, is lifted from space shuttle Endeavour's payload bay.The removal is part of Endeavour's transition and retirement processing. Endeavour is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122,883,151 miles over the course of its 19-year career.

CAPE CANAVERAL, Fla. - - In the Vehicle Assembly Building at NASA's Kennedy Space Center, external fuel tank 129 is lowered between the solid rocket boosters for mating on the mobile launcher platform in high bay 1. The external tank-SRB stack will then be mated in two weeks to space shuttle Endeavour for the STS-126 mission. The STS-126 mission will deliver a Multi-Purpose Logistics Module to the International Space Station. Launch is targeted for Nov. 10.

CAPE CANAVERAL, Fla. -- The upper stage simulator segments are positioned across the floor of the Vehicle Assembly Building's high bay 4 at NASA's Kennedy Space Center in Florida. Four of the segments are already stacked. The upper stage simulator will be used in the test flight identified as Ares I-X in 2009. Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. Ares I is the essential core of a safe, reliable, cost-effective space transportation system that eventually will carry crewed missions back to the moon, on to Mars and out into the solar system. Ares I may also use its 25-ton payload capacity to deliver resources and supplies to the International Space Station, or to "park" payloads in orbit for retrieval by other spacecraft bound for the moon or other destinations. The upper stage simulator comprises 11 segments, each approximately 18 feet in diameter. The simulator segments will simulate the mass

Launch Vehicle Stage Adapter (LVSA) Aft Cone Post Weld #7

Dry-dock with vessel. Boathouse 4, Portsmouth, United Kingdom. Architect: Walters and Cohen Ltd, 2015.

A crane is used to raise the first stage of an LGM-118A Peacekeeper ICBM to the top of a vertical launch tube during the missile's assembly by technicians from Martin Marietta. Country: Unknown

7-AXIS MILLING MACHINE PERFORMING THE ROUGH CUT ON THE 2ND QUARTER DOME DEMONSTRATION ARTICLE HONEYCOMB CORE

Gas kettle in a heating power plant The coal-fired power plant supplies many households and companies with district heating by giving power and power and produces electricity for the base load. Overall, it has an electrical output of 273 megawatts and a thermal output of 680 megawatts. Block 4 was built in 1994 and uses natural gas as a fuel. It has a net output of 99 MW and is designed for the power tip loads. , Property released copyright: xzoonar.com/wolfgangxcezannex 21783183, model released, symbolic photo, property released

Preparations are underway to perform a preliminary swing test of the Core Stage Inter-tank Umbilical (CSITU) on the mobile launcher in High Bay 3 of the Vehicle Assembly Building on Feb. 22, 2019, at NASA's Kennedy Space Center in Florida. The CSITU is a swing-arm umbilical that will connect to the Space Launch System core stage inter-tank. It will provide conditioned air, pressurized gases and power and data connection to the core stage. The Ground Systems Development and Operations Program is overseeing installation of the umbilicals.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers prepare to close the payload bay doors on Atlantis in preparation for the expected impact of Hurricane Frances on Saturday. Other preparations at KSC include powering down the Space Shuttle orbiters and stowing the landing gear. Workers are also taking precautions against flooding by moving spacecraft hardware off the ground and sandbagging facilities. The Orbiter Processing Facility is constructed of concrete and steel and was designed to withstand winds of 105 mph. The Vehicle Assembly Building is constructed of concrete and steel and was designed to withstand winds of 125 mph. Other payload and flight hardware support facilities can endure winds of 110 mph. Launch pads and the Payload Hazardous Servicing Facility can withstand 125-mph winds.

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASAs Kennedy Space Center in Florida, a large crane lifts a new engine and generator high overhead for installation on crawler-transporter 2 CT-2). The Apollo era diesel engines were removed last month.Work continues in high bay 2 to upgrade CT-2 so that it can carry NASAs Space Launch System heavy-lift rocket, which is under design, and new Orion spacecraft to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years.

CAPE CANAVERAL, Fla. -- Inside the Vehicle Assembly Building at NASAs Kennedy Space Center in Florida, a crane is used to lift an Apollo era diesel engine away from crawler-transporter 2 CT-2). New engines will be installed later this month.Work is in progress in high bay 2 to upgrade CT-2 so that it can carry NASAs Space Launch System heavy-lift rocket, which is under design, and new Orion spacecraft to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years.

Move crews at NASAs Michoud Assembly Facility lift the aft liquid oxygen tank (LOX) barrel out of the Vertical Weld Center (VWC) for its next phase of production. The aft barrel will eventually be mated with the forward barrel and the forward and aft domes to form the LOX tank, which will be used in the Space Launch Systems (SLS) Artemis IV mission. The LOX tank holds 196,000 gallons of super-cooled liquid oxygen to help fuel four RS-25 engines. The SLS core stage is made up of five unique elements: the forward skirt, liquid oxygen tank, intertank, liquid hydrogen tank, and the engine section. The liquid oxygen hardware, along with the liquid hydrogen tank will provide propellant to the four RS-25 engines to produce more than two million pounds of thrust to help launch NASAs Orion spacecraft, astronauts, and supplies beyond Earths orbit to the Moon.Together with its four RS-25 engines, the rockets massive 212-foot-tall core stage — the largest stage NASA has ever built — and it

CAPE CANAVERAL, Fla. -- In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, at left center, technicians install the roll control system in the Ares I-X segment in the center. Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. Ares I-X is targeted for launch in July 2009.

Detail, snapshot of a paper mill Detail, snapshot of a paper mill

A850853 U12N DIAMOND BEECH FAC INSTALLATION HAROLD WALLING (Project Engineer) MAY 16 85 EG&G/NTS PHOTO LAB Publication Date: 5/16/1985 CABLES; DIAMOND BEECH; EDGERTON, GERMESHAUSEN & GRIER; EG&G; EQUIPMENT; EQUIPMENT & INSTRUMENTS; FAC INSTALLATION; FAST ACTION CLOSURE; INSTRUMENTS & EQUIPMENT; INSTRUMENTS AND EQUIPMENT; N-TUNNEL; NEVADA; NEVADA TEST SITE; NTS; NUCLEAR ENERGY TECHNOLOGY; TEST SITES; TUNNELS; UGT; UNDERGROUND TESTING; WEAPONS EFFECTS; WIRE & CABLES historical images. 1972 - 2012. Department of Energy. National Nuclear Security Administration. Photographs Related to Nuclear Weapons Testing at the Nevada Test Site.

The liquid hydrogen tank that will be part of the Space Launch System rockets core stage is being prepared for the Artemis III mission at NASAs Michoud Assembly Facility in New Orleans. Eventually, the tank will be connected to the engine section that will house the four RS-25 engines. Once the aft simulator is attached, the LH2 tank undergoes non-destructive evaluation, which will test weld strength and ensure the tank is structurally sound. The SLS core stage is made up of five unique elements: the forward skirt, liquid oxygen tank, intertank, liquid hydrogen tank, and the engine section. The tank holds 537,000 gallons of liquid hydrogen cooled to minus 432 degrees Fahrenheit and sits between the core stages intertank and engine section. The liquid hydrogen hardware, along with the liquid oxygen tank, will provide propellant to the four RS-25 engines at the bottom of the core stage to produce more than two million pounds of thrust to help launch the Artemis III mission to the Mo

Engineer in gas turbine electric power plant exhaust gas and condensation process room

STS-133 DISCOVERY ET-137 NEW GUCP & TANK FILLER PATCH REPAIR

Teams completed the welding of the Artemis III core stage liquid oxygen tank dome at the NASAs Michoud Assembly Facility in New Orleans. Crews moved the dome, which is the top of the tank. The dome was moved to an assembly area where it will be loaded into a robotic welder that will join it with the forward barrel to create half of the liquid oxygen tank. Later another barrel and dome will be added to complete the entire tank. The Space Launch System (SLS) core stage liquid oxygen tank holds 196,000 gallons of super-cooled liquid propellant that serves as one of the propellants for the four RS-25 engines. The SLS core stage is made up of five unique elements: the forward skirt, liquid oxygen tank, intertank, liquid hydrogen tank, and the engine section. The liquid oxygen and the liquid hydrogen tank will provide propellant to the four RS-25 engines to produce more than two million pounds of thrust to help launch NASAs Orion spacecraft, astronauts, and supplies beyond Earths orbit

ARES 7 AXIS MILLING EQUIPMENT AND FACILITIES.

Workers attach a crane to the first Northrop Grumman aft exit cone to arrive for the Space Launch Systems solid rocket boosters inside the Rotation, Processing and Surge Facility at NASAs Kennedy Space Center in Florida on Nov. 4, 2019. The aft exit cone was shipped from Promontory, Utah. It will be checked out and prepared for the Artemis I uncrewed test flight. The aft exit cones sit at the bottommost part of the twin boosters. They are attached to the aft skirts, which contain the booster separation motors. The exit cones help to protect the aft skirts during launch.

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building, or VAB, at NASA's Kennedy Space Center in Florida, preparations are underway to lower the 175-ton crane. In view is the cab that is used to control the crane. The crane is being lowered from Level 16 down to the floor of the transfer aisle to perform upgrades to its 45-year-old controls in order to improve reliability, precision and safety.The Ground Systems Development and Operations Program is overseeing upgrades and modifications to the VAB. The crane will be upgraded so that it can support lifting needs for NASA and other exploration vehicles, including the agency's Space Launch System and Orion spacecraft.

Office of the Deputy Secretary (David Sampson) - Deputy Secretary Sampson's Visit to Morocco

Liquid Hydrogen Tank for Artemis III Moves on to Next Phase of Production. Technicians at NASAs Michoud Assembly Facility in New Orleans move the liquid hydrogen tank of NASAs Space Launch System (SLS) rocket to Cell A for white light scans of the tanks dimensions in preparation of multiple join activities throughout the manufacturing process. The flight hardware will be used for Artemis III, one of the first crewed Artemis missions.The liquid hydrogen tank holds 537,000 gallons of liquid hydrogen cooled to minus 432 degrees Fahrenheit and is the largest of the five elements that make up the rockets 212-foot-tall core stage. The liquid hydrogen tank is situated between the core stages intertank and engine section. The liquid hydrogen hardware, along with the liquid oxygen tank, will provide propellant to the four RS-25 engines at the bottom of the core stage to produce more than two million pounds of thrust to launch NASAs Artemis missions to the Moon.Together with its four RS-25 engin

FIVE SEGMENTS LOADED ONTO THE VERTICAL WELD TOOL FOR SHELL BUCKLING TEST IN BUILDING 4755

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, workers check the starboard integrated truss, known as S6, after its full rotation. The truss was rotated in order to remove and replace lower deck batteries. The final starboard truss in the assembly of the International Space Station, the S6 is scheduled to fly on the STS-119 space shuttle mission, whose launch date is not yet determined.

The second of three aeroshells, at right, for Orion's Launch Abort System (LAS) arrives by flatbed truck in High Bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, on June 26, 2018. The aeroshell arrived by truck from EMF Inc. on nearby Merritt Island. The aeroshells will be stacked and prepared for a full-stress test of the LAS, called Ascent Abort-2 (AA-2) flight test, scheduled for April 2019. During the test, a booster will launch from Space Launch Complex 46 at Cape Canaveral Air Force Station, carrying a fully functional LAS and a 22,000-pound Orion test vehicle to an altitude of 31,000 feet and traveling at more than 1,000 miles an hour. The test will verify the LAS can steer the crew module and astronauts aboard to safety in the event of an issue with the Space Launch System (SLS) rocket when the spacecraft is under the highest aerodynamic loads it will experience during a rapid climb into space. Orion is being prepared for its first integrated un

CAPE CANAVERAL, Fla. -- At Cape Canaveral Air Force Station in Florida, workers use an overhead crane to lift the first stage of a United Launch Alliance Atlas V rocket into the Vertical Integration Facility at Launch Complex 41. NASA's Juno spacecraft is scheduled to launch aboard an Atlas V from Cape Canaveral, Fla. Aug. 5.The solar-powered spacecraft will orbit Jupiter's poles 33 times to find out more about the gas giant's origins, structure, atmosphere and magnetosphere and investigate the existence of a solid planetary core.

CAPE CANAVERAL, Fla. - The second stage of a Delta IV is suspended over its transporter in the Horizontal Integration Facility at Launch Complex 37 on Cape Canaveral Air Force Station in Florida.This United Launch Alliance Delta IV rocket is the vehicle slated to launch GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Processing of the Delta IV is on track for launch, targeted for March 4, 2010.

Launch Vehicle Stage Adapter Aft Cone Weld #1

In High Bay 3 of the Vehicle Assembly Building at NASAs Kennedy Space Center in Florida, the left-hand and right-hand forward segments are secured on top of the center forward segments on the mobile launcher (ML) for the Space Launch System (SLS) on Feb. 24, 2021. Workers with Exploration Ground Systems and contractor Jacobs teams are stacking the twin five-segment boosters on the ML over a number of weeks. When the core stage arrives, it will join the boosters on the mobile launcher, followed by the interim cryogenic propulsion stage and Orion spacecraft. Manufactured by Northrop Grumman in Utah, the twin boosters provide more than 75 percent of the total SLS thrust at launch. The SLS is managed by Marshall Space Flight Center in Huntsville, Alabama. Under the Artemis program, NASA will land the first woman and the next man on the Moon by 2024. The first in a series of increasingly complex missions, Artemis I will test the Orion spacecraft and SLS as an integrated system ahead of cre

A view from above of new work platforms in High Bay 3 of the Vehicle Assembly Building on Feb. 22, 2019, at NASAs Kennedy Space Center in Florida. Preparations are underway to perform an initial swing test of the Core Stage Inter-tank Umbilical (CSITU) on the mobile launcher. The CSITU is a swing-arm umbilical that will connect to the Space Launch System core stage inter-tank. It will provide conditioned air, pressurized gases and power and data connection to the core stage. Exploration Ground Systems at Kennedy is conducting the swing test.

NASA's Mars Science Laboratory spacecraft has been fully stacked for flight in this photograph from inside the Payload Hazardous Servicing Facility at NASA Kennedy Space Center, Fla., in October 2011.

CAPE CANAVERAL, Fla. - In the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, space shuttle Endeavour's external fuel tank is lowered onto the mobile launcher platform in high bay 1 between the solid rocket boosters. Endeavour is the launch vehicle for the STS-127 mission. Endeavour will deliver the Japanese Experiment Module's Experiment Logistics Module-Exposed Section, or ELM-ES, to the International Space Station on STS-127. Launch is targeted for mid-June 2009.

CAPE CANAVERAL, Fla. -- At NASAs Kennedy Space Center in Florida, construction workers lower the large space shuttle-era Level E north work platform from high bay 3 inside the Vehicle Assembly Building, or VAB. The platform will be moved to the VAB north parking area for temporary storage.The work is part of a center-wide refurbishment initiative under the Ground Systems Development and Operations, or GSDO, Program. High bay 3 is being refurbished to accommodate NASAs Space Launch System and a variety of other spacecraft.

KENNEDY SPACE CENTER, FLA. -- Workers in the Operations and Checkout Building keep watch as an overhead crane is lowered toward the Joint Airlock Module that it will lift and place in the payload canister for transfer to the Space Station Processing Facility. There the module will undergo more preflight processing for the STS-104 mission scheduled for launch aboard Space Shuttle Atlantis May 17, 2001. The Joint Airlock Module is the gateway from which crew members aboard the International Space Station will enter and exit the 470-ton orbiting research facility

San Sebastián de los Reyes (Madrid), 01/31/2017. Heineken brewery. Photo: Ignacio Gil Archdc.

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building, or VAB, at NASA's Kennedy Space Center in Florida, workers have secured a crane to a portion of the catwalk on the east side of Level 16. The catwalk will be removed to allow room for the removal of the 175-ton crane that is situated above the transfer aisle. The crane will be lowered to the floor to perform upgrades to its 45-year-old controls in order to improve reliability, precision and safety. The Ground Systems Development and Operations Program is overseeing upgrades and modifications to the VAB. The crane will be upgraded so that it can support lifting needs for NASA and other exploration vehicles, including the agency's Space Launch System and Orion spacecraft.

KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building, the solid rocket booster segments are being stacked on the mobile launcher platform for mission STS-122. Space shuttle Atlantis is targeted for launch on mission STS-122 on Dec. 6.

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility prepare the wheel bay to stow Atlantis landing gear in preparation for the expected impact of Hurricane Frances on Saturday. Other preparations at KSC include powering down the Space Shuttle orbiters, and closing their payload bay doors. Workers are also taking precautions against flooding by moving spacecraft hardware off the ground and sandbagging facilities. The Orbiter Processing Facility is constructed of concrete and steel and was designed to withstand winds of 105 mph. The Vehicle Assembly Building is constructed of concrete and steel and was designed to withstand winds of 125 mph. Other payload and flight hardware support facilities can endure winds of 110 mph. Launch pads and the Payload Hazardous Servicing Facility can withstand 125-mph winds.

. These images and videos show technicians at NASAs Michoud Assembly Facility in New Orleans lifting and installing the liquid oxygen dome weld confidence article for a future upper stage for NASAs SLS (Space Launch System) rocket onto the LTAC (LOX Tank Assembly Center) in Building 115 at Michoud for the next phase of manufacturing in July 2023. The dome makes up a portion of the liquid oxygen tank weld confidence article for the EUS (exploration upper stage). Teams use weld confidence articles to verify welding procedures and structural integrity of the welds to manufacture structural test and flight versions of the hardware. EUS flight hardware is in early production at Michoud. The more powerful upper stage and its four RL10 engines will be used on the second configuration of the SLS rocket, known as Block 1B, and will provide in-space propulsion to send astronauts in NASAs Orion spacecraft and heavy cargo on a precise trajectory to the Moon. NASA and Boeing, the lead contractor fo

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASAs Kennedy Space Center, an overhead crane lifts the Kibo Japanese Experiment Module - Pressurized Module from its stand. The module, part of the payload for space shuttle Discoverys STS-124 mission, will be moved and placed in the payload canister for transportation to Launch Pad 39A. On the mission, the STS-124 crew will transport the Kibo module as well as the Japanese Remote Manipulator System to the International Space Station to complete the Kibo laboratory. The launch of Discovery is targeted for May 31.

KENNEDY SPACE CENTER, FLA. -- In the Operations and Checkout Building, workers check out the placement of one of four gas tanks on the Spacelab Logistics Double Pallet. Part of the STS-104 payload, the storage tanks two gaseous oxygen and two gaseous nitrogen comprise the high pressure gas assembly that will be attached to the Joint Airlock Module during two spacewalks. The tanks will support future spacewalk operations from the Station and augment the Service Module gas resupply system

Technicians ready two NASA Space Launch System (SLS) solid rocket boosters for mating to the rockets two aft skirts on June 16, 2020, inside Kennedy Space Centers Rotation, Processing and Surge Facility. Together, the twin boosters provide more than 75 percent of the total SLS thrust at launch. Manufactured by Northrop Grumman in Promontory, Utah, the boosters arrived at Kennedy via train. The cross-country journey was an important milestone for the agencys Artemis I launch. The first in a series of increasingly complex missions, Artemis I will test the Orion spacecraft and SLS as an integrated system prior to crewed missions to the Moon. Once the boosters are mated with the aft skirts, they will be moved to the Vehicle Assembly Building for stacking on the mobile launcher.

Workers continue stacking the twin solid rocket boosters in highbay 1 inside Kennedy Space Center's Vehicle Assembly Building. The solid rocket boosters are being prepared for NASA's next Space Shuttle launch, mission STS-117. The mission is scheduled to launch aboard Atlantis no earlier than March 16, 2007.

Druckkessel in einem Gaskraftwerk *** Pressure boilers in a Gas power plant 1074706760

High up in the Vehicle Assembly Building (VAB) at NASA's Kennedy Space Center in Florida, construction workers assist with the installation of the final work platform, A north, in High Bay 3, as a crane lowers the platform into place. The platform will be installed and secured on its rail beam high up on the north wall of the high bay. The installation of the final topmost level completes the 10 levels of work platforms, 20 platform halves altogether, that will surround NASA's Space Launch System rocket and the Orion spacecraft and allow access during processing for missions, including the first uncrewed flight test of Orion atop the SLS rocket in 2018. The A-level platforms will provide access to the Orion spacecraft's Launch Abort System for Orion lifting sling removal and installation of the closeout panels. The Ground Systems Development and Operations Program, with support from the center's Engineering Directorate, is overseeing upgrades and modifications to the VAB, including ins

Advanced Electric Propulsion Systems Contract, Technology Demonstration Unit, TDU-3 Checkout Test Hardware Installed in Vacuum Facility 5, VF-5

The second of three aeroshells, at right, for Orion's Launch Abort System (LAS) arrives by flatbed truck in High Bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, on June 26, 2018. The aeroshell was shipped from EMF Inc. on nearby Merritt Island. It will be offloaded and secured in the high bay. The aeroshells will be stacked and prepared for a full-stress test of the LAS, called Ascent Abort-2 (AA-2) flight test, scheduled for April 2019. During the test, a booster will launch from Space Launch Complex 46 at Cape Canaveral Air Force Station, carrying a fully functional LAS and a 22,000-pound Orion test vehicle to an altitude of 31,000 feet and traveling at more than 1,000 miles an hour. The test will verify the LAS can steer the crew module and astronauts aboard to safety in the event of an issue with the Space Launch System (SLS) rocket when the spacecraft is under the highest aerodynamic loads it will experience during a rapid climb into space. Orion

Magnet lifting metal at steel mill

Interior view of Launch Pad 39A

Rail cars being loaded with product

Tarapur Atomic Power Station Unit 3&4 General view of fuelling machine under commissioning during construction of power station at Tarapur, Bombay Mumbai, Maharashtra, India Copyright: xManoejxPaateel/DinodiaxPhotox

AK Kenai Penninsula Hydro Electric Project Power House Interior Bradley Lake

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASAs Kennedy Space Center in Florida, ground support technicians attach crane lines to the treads on the C truck of crawler-transporter 2, or CT-2, so they can be lifted up and away. The treads are being removed in order to gain access to remove the gear boxes. Work continues in high bay 2 to upgrade CT-2. The modifications are designed to ensure CT-2s ability to transport launch vehicles currently in development, such as the agencys Space Launch System, to the launch pad. The Ground Systems Development and Operations Program office at Kennedy is overseeing the upgrades. For more than 45 years the crawler-transporters were used to transport the mobile launcher platform and the Apollo-Saturn V rockets and, later, space shuttles to Launch Pads 39A and B.

CAPE CANAVERAL, Fla. -In the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida, the end of the Ares I-X motor segment is removed to allow propellant grain inspection of the interior. It is one of four reusable motor segments and nozzle exit cone shipped by the Ares I first-stage prime contractor Alliant Techsystems Inc. for final processing and integration in the facility. The booster used for the Ares I-X launch is being modified by adding new forward structures and a fifth segment simulator. The motor is the final hardware needed for the rocket's upcoming flight test this summer. The stacking operations are scheduled to begin in the Vehicle Assembly Building in April.

Interior View of Orbiter Processing Facility 3

NASA AND BOEING ENGINEERS INSPECT AND PREPARE ONE OF THE LARGEST COMPSITE ROCKET PROPELLANT TANKS EVER MANUFACTURED. THE COMPOSITE CRYOTANK PROMISES A 30% WEIGHT REDUCTION AND A 25 % COST REDUCTION OVER THE PREVIOUSLY USED METAL TANKS.

CAPE CANAVERAL, Fla. - In the Rotation, Processing, and Surge Facility at NASA's Kennedy Space Center in Florida, the Ares I-X aft skirt is mated to the aft segment. The complete Ares I-X will be assembled in the Vehicle Assembly Building. The launch of Ares I-X is targeted for August 2009.

Miller brewing facility, New York

Cooling plants, Chernobyl nuclear power plant, Chernobyl exclusion zone, Ukraine, Europe

NEXT-C flight PPU

Production of role steel in steel plant

Move crews at NASAs Michoud Assembly Facility lift the aft liquid oxygen tank (LOX) barrel out of the Vertical Weld Center (VWC) for its next phase of production. The aft barrel will eventually be mated with the forward barrel and the forward and aft domes to form the LOX tank, which will be used in the Space Launch Systems (SLS) Artemis IV mission. The LOX tank holds 196,000 gallons of super-cooled liquid oxygen to help fuel four RS-25 engines. The SLS core stage is made up of five unique elements: the forward skirt, liquid oxygen tank, intertank, liquid hydrogen tank, and the engine section. The liquid oxygen hardware, along with the liquid hydrogen tank will provide propellant to the four RS-25 engines to produce more than two million pounds of thrust to help launch NASAs Orion spacecraft, astronauts, and supplies beyond Earths orbit to the Moon.Together with its four RS-25 engines, the rockets massive 212-foot-tall core stage — the largest stage NASA has ever built — and it

Launch Vehicle Stage Adapter (LVSA) Aft Cone Post Weld #7

FIVE SEGMENTS LOADED ONTO THE VERTICAL WELD TOOL FOR SHELL BUCKLING TEST IN BUILDING 4755

CAPE CANAVERAL, Fla. - At center, ballast is lowered into segment 7 of the Ares I-X rocket in Vehicle Assembly Building high bay 4. Other segments are stacked around the bay. These ballast assemblies are being installed in the upper stage segments 1 and 7 and will mimic the mass of the fuel. Their total weight is approximately 160,000 pounds.Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. Ares I is the essential core of a safe, reliable, cost-effective space transportation system that eventually will carry crewed missions back to the moon, on to Mars and out into the solar system. The Ares I-X is targeted for launch in July 2009.

On Space Launch Complex 2 at Vandenberg Air Force Base in California, the second solid rocket motor, or SRM, is moved into place alongside the Delta II first stage. The Delta II is the launch vehicle for the OSTM/Jason-2 spacecraft, USA

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, the Cargo Element Lifting Assembly (CELA) carries the Lightweight Multi-Purpose Experiment Support Structure Carrier (LMC) closer to the Payload Transportation Canister. The LMC is being installed in the canister in preparation for transfer to Launch Pad 39B. The LMC will deliver a replacement Control Moment Gyroscope (CMG) and the Detailed Test Objective (DTO) tile sample repair kit to the International Space Station on Discoverys Return to Flight mission STS-114.

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, the right payload bay door of Discovery is being closed in preparation for the rollover of the orbiter to the Vehicle Assembly Building. The primary payload, the U.S. Node 2, which is named Harmony, will be installed in the payload bay at the pad prior to Discovery's liftoff on mission STS-120. The mission will be the 23rd flight for the assembly of the International Space Station. Space Shuttle Discovery is targeted for launch on Oct. 23.

CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building, or VAB, at NASA's Kennedy Space Center in Florida, preparations are underway to remove a portion of the catwalk on the east side of Level 16 to allow room for the removal of the 175-ton crane that is situated above the transfer aisle. The crane will be lowered to the floor to perform upgrades to its 45-year-old controls in order to improve reliability, precision and safety. The Ground Systems Development and Operations Program is overseeing upgrades and modifications to the VAB. The crane will be upgraded so that it can support lifting needs for NASA and other exploration vehicles, including the agency's Space Launch System and Orion spacecraft.

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, preparations are under way to close space shuttle Discoverys payload bay doors for the final time during Space Shuttle Program transition and retirement activities.Following the door closure, the vehicle will be powered down for the last time. Discovery is being prepared for public display at the Smithsonians National Air and Space Museum Steven F. Udvar-Hazy Center in Chantilly, Va., in 2012.

AUTOMOTIVE INDUSTRY CAR ASSEMBLY BY ROBOT WELDING

Large industrial pipe with fittings in mineral mine processing p

T&R Endeavour Right Side Tail Cone Buildup

ARES 7 AXIS MILLING EQUIPMENT AND FACILITIES.

NASA, Boeing Complete Barrel Sections for future SLS Exploration Upper Stage Structural Test Article. These images and videos show technicians at NASAs Michoud Assembly Facility in New Orleans examining and lifting midbody barrels for the Exploration Upper Stage (EUS) structural test article of the SLS (Space Launch System) rocket in May 2023.The barrel sections make up the body, or main structure, of the future in-space propulsion stage for the mega rocket. The Exploration Upper Stage will be used on the second configuration of the SLS rocket, known as Block 1B, and will provide in-space propulsion to send astronauts in NASAs Orion spacecraft and heavy cargo on a precise trajectory to the Moon. Beginning with Artemis IV, EUS will replace the interim cryogenic propulsion stage for the Block 1 configuration of SLS. It has larger propellant tanks and four RL10 engines, enabling SLS to launch 40% more cargo to the Moon along with crew. EUS flight hardware is in early production at Michoud

All Six Hydroelectric Turbines Inside Iraq's Haditha Dam

Engineers lift the Orion Crew Module Adapter Structural Test Article into the test stand at NASA Glenn Research Center Plum Brook Facility on Sept. 23, 2015. Part of Batch image transfer from Flickr.

Rolls of metal for the chassis production, golf car production, VW plant in Wolfsburg, Lower Saxony, Germany, Europe

CAPE CANAVERAL, Fla. - Inside the Rotation, Processing and Surge Facility, or RPSF, at the Kennedy Space Center in Florida, an overhead crane lifts NASA locomotive No. 3 off of its trucks to be moved into position atop the trucks previously used by locomotive No. 2. The RPSF was built to support work on the solid rocket used motors during the space shuttle era. The facility had never previously been used for another purpose, but is now free to serve other customers. With rails running into the building's high bay and a pair of heavy-lift cranes positioned overhead, the facility's capabilities were a perfect fit for the NASA Railroad's needs. Railroad managers wanted to trade the wheel and axle assemblies, or trucks, of locomotives No. 2 and No. 3. Locomotive No. 3 was painstakingly restored in recent years by the NASA Railroad team, and handles much of the rail work required at the center in the post-shuttle era. But the trucks on locomotive No. 2 are in better shape and are more en

Operations are underway to stack the United Launch Alliance Atlas V Centaur second stage onto the first stage in the Vertical Integration Facility at Space Launch Complex 41 at Cape Canaveral Air Force Station in Florida. The Geostationary Operational Environmental Satellite (GOES-R) will launch aboard the Atlas V rocket in November. GOES-R is the first satellite in a series of next-generation NOAA GOES Satellites.

SALA DE PRENSADO CON PRENSAS HIDRAULICAS PARA HACER PIEZAS DE CAROCERIA DE COCHES - FOTO AÑOS 70. Location: SEAT. Barcelona. SPAIN.

The Bevatron was a particle accelerator at Lawrence Berkeley National Laboratory in California, which began operating in 1954. It was designed to accelerate protons to sufficient energy to create antiprotons, and verify the particle-antiparticle symmetry of nature, then only theorized. The antiproton was discovered there in 1955, resulting in the 1959 Nobel Prize in physics for Emilio Segr® and Owen Chamberlain. The Bevatron received a new lease on life in 1971, when it was joined to the SuperHILAC linear accelerator as an injector for heavy ions. The combination was conceived by Albert Ghiorso, who named it the Bevalac. It could accelerate any nuclei in the periodic table to relativistic energies. It was finally decommissioned in 1993.

2LT Jeremy Thorne adjusts a spectrometer camera on an electron beam accelerator. Base: Norton Air Force Base State: California (CA) Country: United States Of America (USA)

Orbiter Processing Facility High Bay No. 3, 13 platforms and payload bay, looking northeast, July 31, 2006

Hot steel in a rotary furnace at the Armco Steel plant in Baltimore, Maryland

France, Occitanie, Blagnac on 2023-07-10. Bruno Le Maire, French Minister for the Economy, Finance and Industrial and Digital Sovereignty, Roland Lescure, French Minister for Industry, Dominique Faure, French Minister for Local Authorities and Rural Affairs, and Clement Beaune, French Minister for Transport, inaugurate Airbus' new A320 Family final assembly line in Blagnac. This new assembly line, which is highly digitised and automated, will employ almost 700 people. They were welcomed by Guillaume Faury, Executive Chairman of Airbus, Marion Smeyers, Director of the new assembly line, and Carole Delga, President of the Occitanie Region. Photograph by Martin Bertrand.France, Occitanie, Blagnac le 2023-07-10. Bruno Le Maire, ministre de lEconomie, des Finances et de la Souverainete industrielle et numerique, Roland Lescure, ministre de lIndustrie, Dominique Faure, ministre des Collectivites territoriales et de la Ruralite, et Clement Beaune, ministre des Transports, inaugurent la nou

Detail, snapshot of a paper mill Detail, snapshot of a paper mill

New construction of the Berne sewer, Emscher conversion, Essen, Ruhr area, North Rhine-Westphalia, Germany, Europe

. Crews at NASAs Michoud Assembly Facility in New Orleans move the forward skirt of NASAs Space Launch System (SLS) rocket to another part of the facility Dec. 15. Teams are preparing to apply the thermal protection system to the flight hardware, which will protect it from the extreme temperatures during launch and flight. The forward skirt is part of the core stage that will power the SLS rocket for the Artemis III mission. The forward skirt houses flight computers, cameras, and avionics..The SLS core stage is made up of five unique elements: the forward skirt, liquid oxygen tank, intertank, liquid hydrogen tank, and the engine section. When fully stacked, the forward skirt is located at the top of the core stage and connects the stage to the upper part of the rocket. Together with its four RS-25 engines, the rockets massive 212-foot-tall core stage the largest stage NASA has ever built and its twin solid rocket boosters produce 8.8 million pounds of thrust to send NASAs Orion space

CAPE CANAVERAL, Fla. - Motion of the segments of a new crane is tested inside the Operations and Checkout Building at NASA's Kennedy Space Center in Florida. The new O&C low-bay crane is a 25-ton overhead bridge crane built for Lockheed Martin and Space Florida by American Crane and Equipment Corporation in Douglasville, Pa. The crane has a bridge span of 78-2” and a hook height of 48-10”. The crane will be used for lifting and moving flight hardware, fixtures and equipment in support of the Orion spacecraft manufacturing. Part of NASA's Constellation Program, the Orion spacecraft will return humans to the moon and prepare for future voyages to Mars and other destinations in our solar system.

of 4