Ship Models and Engineering

Model ship displays including half models of historical warships and gun models, highlighting intricate shipbuilding details.

Model of a 16-cm Gun on a Pivot and Slide on Part of a Gun Deck, Rijkswerf Amsterdam, 1865 gunmodel. presentation model Model of a drawn front loader on turning and sliding sled on part of a ship deck. The brass loop, long 34 cm and with a caliber of 16 mm, thickened at the tapping piece and behind it again; No jewelry tires except the kulas band. The soul has been drawn with six grooves. The brush is in the neck of the grape and is locked with a bracket. The piece has a Percussieslot No. 1 (see NG-MC-1050), where the lock support behind the Kulasband protrudes, where a setup can be attached. The upper offspring consists of two cheeks, two axle blocks without wheels, a slanted calf and a brake device. The elevation is done by means of an eleve screw on the rear axle block. The brake device, attached to the front axle block, consists of a clamp around the shelves of the sled, which is tightened with a screw. The Affuit has four rollers against the short sides of the cheeks, which only g
Model of a 16-cm Gun on a Pivot and Slide on Part of a Gun Deck, Rijkswerf Amsterdam, 1865 gunmodel. presentation model Model of a drawn front loader on turning and sliding sled on part of a ship deck. The brass loop, long 34 cm and with a caliber of 16 mm, thickened at the tapping piece and behind it again; No jewelry tires except the kulas band. The soul has been drawn with six grooves. The brush is in the neck of the grape and is locked with a bracket. The piece has a Percussieslot No. 1 (see NG-MC-1050), where the lock support behind the Kulasband protrudes, where a setup can be attached. The upper offspring consists of two cheeks, two axle blocks without wheels, a slanted calf and a brake device. The elevation is done by means of an eleve screw on the rear axle block. The brake device, attached to the front axle block, consists of a clamp around the shelves of the sled, which is tightened with a screw. The Affuit has four rollers against the short sides of the cheeks, which only g