Orion Crew Module KSC Ground Ops PathfinderWork continues on the fabrication of the Orion Crew Module KSC Ground Operations pathfinder in building 1232A at NASA Langley.

Orion Crew Module KSC Ground Ops PathfinderWork continues on the fabrication of the Orion Crew Module KSC Ground Operations pathfinder in building 1232A at NASA Langley.
SuperStock offers millions of photos, videos, and stock assets to creatives around the world. This image of Orion Crew Module KSC Ground Ops PathfinderWork continues on the fabrication of the Orion Crew Module KSC Ground Operations pathfinder in building 1232A at NASA Langley. by Piemags/PL Photography Limited is available for licensing today.

Visually Similar More from Space Technology Assembly story

RM
6145-45032282
CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-2 at NASAs Kennedy Space Center in Florida, technicians monitor the progress as a large crane carries the remote manipulator system (RMS) robotic arm that was removed from space shuttle Atlantis payload bay. The RMS will be transported to NASAs Johnson Space Center in Houston for possible use on future spaceflights. The work is part of the Space Shuttle Programs transition and retirement processing of shuttle Atlantis. The shuttle is being prepared for display at the Kennedy Space Center Visitor Complex.
RM
6145-55971079
NASA, Boeing Complete Barrel Sections for future SLS Exploration Upper Stage Structural Test Article. These images and videos show technicians at NASAs Michoud Assembly Facility in New Orleans examining and lifting midbody barrels for the Exploration Upper Stage (EUS) structural test article of the SLS (Space Launch System) rocket in May 2023.The barrel sections make up the body, or main structure, of the future in-space propulsion stage for the mega rocket. The Exploration Upper Stage will be used on the second configuration of the SLS rocket, known as Block 1B, and will provide in-space propulsion to send astronauts in NASAs Orion spacecraft and heavy cargo on a precise trajectory to the Moon. Beginning with Artemis IV, EUS will replace the interim cryogenic propulsion stage for the Block 1 configuration of SLS. It has larger propellant tanks and four RL10 engines, enabling SLS to launch 40% more cargo to the Moon along with crew. EUS flight hardware is in early production at Michoud
RM
6145-55971125
. Crews at NASAs Michoud Assembly Facility in New Orleans load alluminum alloy panels into the Vertical Weld Center June 1. The Vertical Weld Center is a friction-stir weld tool for the large structures of the core stage for the SLS (Space Launch System) rocket. Teams load the panels into the VWC using an overhead crane system, then multiple panels are welded together to create entire barrels. The panels in these images are some of the five barrels that will form the SLS liquid hydrogen propellant tank for the SLS rocket that will power NASAs Artemis IV mission, which is also the first flight of SLS in its more powerful Block 1B configuration.The SLS core stage is made up of five unique elements: the forward skirt, liquid oxygen tank, intertank, liquid hydrogen tank, and the engine section. The liquid hydrogen propellant tank holds 537,000 gallons of liquid hydrogen cooled to minus 432 degrees Fahrenheit and sits between the core stages intertank and engine section. The liquid hydrogen
RM
6145-45237216
This image depicts a high angle view of technicians working on the instrument unit (IU) component assembly for the SA-8 mission in Marshall Space Flight Center's building 4705. A thin, circular structure, only 1-meter high and 7.6 meters in diameter, the IU was sandwiched between the S-IV and Apollo spacecraft. Packed inside were the computers, gyroscopes, and assorted black boxes necessary to keep the launch vehicle properly functioning and on its course.
RM
6145-44797668
CAPE CANAVERAL, Fla. - In the Horizontal Integration Facility at Launch Complex 37 on Cape Canaveral Air Force Station in Florida, a worker stands with his head inside the first stage of a Delta IV rocket as he performs tasks to secure it to the second stage, at left.This United Launch Alliance Delta IV rocket is slated to launch GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Launch is targeted for Feb. 25.
RM
6188-67155200
Detail, snapshot of a paper mill Detail, snapshot of a paper mill
RM
6145-58967781
Interior View of Orbiter Processing Facility 3
RM
6145-44866561
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, the remote manipulator system, or RMS, is lifted from space shuttle Endeavour's payload bay.The removal is part of Endeavour's transition and retirement processing. Endeavour is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122,883,151 miles over the course of its 19-year career.
RM
6145-44722613
CAPE CANAVERAL, Fla. - - In the Vehicle Assembly Building at NASA's Kennedy Space Center, external fuel tank 129 is lowered between the solid rocket boosters for mating on the mobile launcher platform in high bay 1. The external tank-SRB stack will then be mated in two weeks to space shuttle Endeavour for the STS-126 mission. The STS-126 mission will deliver a Multi-Purpose Logistics Module to the International Space Station. Launch is targeted for Nov. 10.
RM
6145-44745168
CAPE CANAVERAL, Fla. -- The upper stage simulator segments are positioned across the floor of the Vehicle Assembly Building's high bay 4 at NASA's Kennedy Space Center in Florida. Four of the segments are already stacked. The upper stage simulator will be used in the test flight identified as Ares I-X in 2009. Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. Ares I is the essential core of a safe, reliable, cost-effective space transportation system that eventually will carry crewed missions back to the moon, on to Mars and out into the solar system. Ares I may also use its 25-ton payload capacity to deliver resources and supplies to the International Space Station, or to "park" payloads in orbit for retrieval by other spacecraft bound for the moon or other destinations. The upper stage simulator comprises 11 segments, each approximately 18 feet in diameter. The simulator segments will simulate the mass
RM
6145-45101020
Launch Vehicle Stage Adapter (LVSA) Aft Cone Post Weld #7
RM
1801-62857559
Dry-dock with vessel. Boathouse 4, Portsmouth, United Kingdom. Architect: Walters and Cohen Ltd, 2015.
RM
6145-54441747
A crane is used to raise the first stage of an LGM-118A Peacekeeper ICBM to the top of a vertical launch tube during the missile's assembly by technicians from Martin Marietta. Country: Unknown
RM
6145-44804739
7-AXIS MILLING MACHINE PERFORMING THE ROUGH CUT ON THE 2ND QUARTER DOME DEMONSTRATION ARTICLE HONEYCOMB CORE
RM
6188-60069815
Gas kettle in a heating power plant The coal-fired power plant supplies many households and companies with district heating by giving power and power and produces electricity for the base load. Overall, it has an electrical output of 273 megawatts and a thermal output of 680 megawatts. Block 4 was built in 1994 and uses natural gas as a fuel. It has a net output of 99 MW and is designed for the power tip loads. , Property released copyright: xzoonar.com/wolfgangxcezannex 21783183, model released, symbolic photo, property released
RM
6145-45192326
Preparations are underway to perform a preliminary swing test of the Core Stage Inter-tank Umbilical (CSITU) on the mobile launcher in High Bay 3 of the Vehicle Assembly Building on Feb. 22, 2019, at NASA's Kennedy Space Center in Florida. The CSITU is a swing-arm umbilical that will connect to the Space Launch System core stage inter-tank. It will provide conditioned air, pressurized gases and power and data connection to the core stage. The Ground Systems Development and Operations Program is overseeing installation of the umbilicals.
RM
6145-44621199
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers prepare to close the payload bay doors on Atlantis in preparation for the expected impact of Hurricane Frances on Saturday. Other preparations at KSC include powering down the Space Shuttle orbiters and stowing the landing gear. Workers are also taking precautions against flooding by moving spacecraft hardware off the ground and sandbagging facilities. The Orbiter Processing Facility is constructed of concrete and steel and was designed to withstand winds of 105 mph. The Vehicle Assembly Building is constructed of concrete and steel and was designed to withstand winds of 125 mph. Other payload and flight hardware support facilities can endure winds of 110 mph. Launch pads and the Payload Hazardous Servicing Facility can withstand 125-mph winds.
RM
6145-45045444
CAPE CANAVERAL, Fla. - Inside the Vehicle Assembly Building at NASAs Kennedy Space Center in Florida, a large crane lifts a new engine and generator high overhead for installation on crawler-transporter 2 CT-2). The Apollo era diesel engines were removed last month.Work continues in high bay 2 to upgrade CT-2 so that it can carry NASAs Space Launch System heavy-lift rocket, which is under design, and new Orion spacecraft to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years.
RM
6145-45042783
CAPE CANAVERAL, Fla. -- Inside the Vehicle Assembly Building at NASAs Kennedy Space Center in Florida, a crane is used to lift an Apollo era diesel engine away from crawler-transporter 2 CT-2). New engines will be installed later this month.Work is in progress in high bay 2 to upgrade CT-2 so that it can carry NASAs Space Launch System heavy-lift rocket, which is under design, and new Orion spacecraft to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years.
RM
6145-44472211
Move crews at NASAs Michoud Assembly Facility lift the aft liquid oxygen tank (LOX) barrel out of the Vertical Weld Center (VWC) for its next phase of production. The aft barrel will eventually be mated with the forward barrel and the forward and aft domes to form the LOX tank, which will be used in the Space Launch Systems (SLS) Artemis IV mission. The LOX tank holds 196,000 gallons of super-cooled liquid oxygen to help fuel four RS-25 engines. The SLS core stage is made up of five unique elements: the forward skirt, liquid oxygen tank, intertank, liquid hydrogen tank, and the engine section. The liquid oxygen hardware, along with the liquid hydrogen tank will provide propellant to the four RS-25 engines to produce more than two million pounds of thrust to help launch NASAs Orion spacecraft, astronauts, and supplies beyond Earths orbit to the Moon.Together with its four RS-25 engines, the rockets massive 212-foot-tall core stage — the largest stage NASA has ever built — and it
RM
6145-44759913
CAPE CANAVERAL, Fla. -- In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, at left center, technicians install the roll control system in the Ares I-X segment in the center. Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. Ares I-X is targeted for launch in July 2009.
Image - Royalty Free Editorial
Royalty-Free Standard Editorial licenses are granted for worldwide, non-exclusive and perpetual NON-COMMERCIAL uses, unless specifically noted otherwise. All Royalty-Free transactions are final. The Royalty-Free Standard Editorial license has no limitations and covers up to 15 users.
  • $50.00 Low500 X 500
  • $150.00 Med750 X 750
  • $250.00 High2100 X 2100
  • $350.00 Super High7000 X 7000
Order a Framed Print
Looking for a license?
Click here, and we'll help you find it! Questions? Just ask!
DETAILS
Image Number: 6145-44815976Royalty FreeCredit Line:Piemags/PL Photography Limited/SuperStockCollection:PL Photography LimitedStory:Space Technology AssemblyContributor:PiemagsModel Release:NoProperty Release:NoResolution:3861×2574
Crew Module
Orion|