Old fashioned microscope on table

Old fashioned microscope on table
SuperStock offers millions of photos, videos, and stock assets to creatives around the world. This image of Old fashioned microscope on table by Tetra Images is available for licensing today.

Visually Similar More from Antique Mechanical Models story

RM
1525-23243665
Vintage iron white isolated
RM
6145-45795479
Model or a 30-pounder Gun On deck. Model of a canon of 30 pounds on rolling horse on ship's part, with all its accessories. The loop is painted from wood and black, has a length of 63.4 cm and a 34 mm caliber; The grape is flat from behind and has a pants. The rolling horse, of the narrower than rear, consists of two cheeks with four stages, connected by a sloping calf, a breastpiece with breast valve and the axis, which are connected to the sole plate in the length. The double wooden wheels are all of the same size. Adjustment block and Stelwig are found separately and added to the model, as well as the loading utensils consisting of a powder scoop, two wipers (one of wool, one of hole hair), a crasser, a scraper and a setter. The deck on which the model is oblique, the ship's wall has a diagonal bandage, the gate has a rectangular porthole. Other accessories are three cannonballs in a rack on the ship's wall, two carets in the same rack, two stock barrels, a card suits, a powder, a p
RM
6145-45790666
Two models of a 30-pounder gun on deck. Two identical models of a canon of 30 pounds on Marshall affuit on a ship part with part of the shipwanding, incomplete. The wooden loop, long 22.5-23 cm, is not exchanged; It has a flat grape with pants ring. The affit consists of two parts. The front piece sits with a spindle bolt in heavy brass brackets on the gate threshold; It is a heavy wooden block with a transverse roller underneath for the baking and a heavy metal mik on top of which the loop is in the saddle. The rear insuit, more narrower, consists of two cheeks with four stairs each, connected by a diagazing calf, a ball behind and a bolt by both cheeks in the middle. The tapes are applied to the cheeks. The response is attached to the cheeks with brackets. The model has wooden wheels. The hoist is incomplete. A slicing runs from the sides of the gate through the pants ring; A second stroke is attached to the cheeks of the rear insert and is around the mik on which the loop rests. Sca
RM
6145-58932896
Centrifuge -
RM
1525-22511448
Old sewing machine isolated on a white background
RM
4409-21349120
RELOJ DE SONERIA S XVIII. Location: MUSEO DE HISTORIA DE MADRID-RELOJES. MADRID. SPAIN.
RM
6145-46729262
Digible pressure press. Designed by Alexander Lagerman onkring 1850.
RM
6145-45816482
Tackle-Board and Sledge for Rope Making. A rope shop consisting of a pivot for beating and tensioning the strands and a slide for beating the rope. The pivot is on a heavy base board and has a framework for four strands; A large gear that drives three small gears in the corners is operated with a steam. The hooks to which the strands are attached are mounted on the axes of the gears and the wheeler ensures that the outer three run faster than the middle, which is also running in the other direction. The sled has four wheels; The mechanism has only a hook, whereby the movement of the crank is transferred via a large to a small gear.
RM
4409-17554340
Model Field Cannon with Carriage. Austrian. Date: 1644. Dimensions: Length overall of cannon: 23 3/8 in. (57.4 cm)Bore: 15/16 in. (2.4 cm)Length of carriage: 38 15/16 in. (99 cm)Width at cheek: 5 5/8 in. (14.3 cm)Width at trail: 8 1/2 in. (21.7 cm)Diameter of wheels: 22 1/16 in. (56 cm)Width between outer surface of hubs: 21 1/8 in. (53.7 cm)Overall length of mounted cannon: 47 1/4 in. (120 cm)Weight of cannon: 30 lb. 8 oz.Weight of carriage: 55 lb. 15 oz. Bronze, iron, and wood. Origin: Austria. Museum: The Chicago Art Institute, Chicago, USA.
RM
4409-17452027
Electric Generator. Dated: c. 1940. Dimensions: overall: 30.5 x 40.7 cm (12 x 16 in.). Medium: watercolor, graphite, and colored pencil on paperboard. Museum: National Gallery of Art, Washington DC. Author: Carl Buergerniss.
RM
6145-59494169
Model of a Hoist or GIN, Jan Marten Kleman, c. 1793 - c. 1807 demonstration model Model of a composite Driepootbok: The mechanism consists of a crank with a screw without end, which drives the Windas. The hoist goes from the axle through a disc in the top to the heavy block on which a lead weight hangs, and back to the top. One of the hind legs is equipped with staggered knees, probably footrests for climbing the goat. Amsterdam wood (plant material). copper (metal). brass (alloy). iron (metal). lead (metal). ivory. rope
RM
1848-56635564
Old coffee grinder
RM
6145-46619049
. This clock was originally intended as merchandise for sale or as a gift. It was hung up in the Save House’ as the only means of providing a sense of time during the long, polar nights. On 3 December 1596, it froze. Barentsz and Van Heemskerck shoved a parting letter into the gunpowder horn when they left. Three centuries later, the horn was rediscovered with the letter still inside. The letter cannot be exhibited due to its fragility.
RM
6145-52772785
Travel camera produced by Otto Beck, wooden construction, dimensions 13 x 18 cm, used for portable photography in the late 19th century.
RM
1525-21141093
retro old coffee grinder with vintage wooden background
RM
6145-45802462
Model or steering gear. Technical model with rough representation of a stern with wrinkled mirror and hollow wulf and two decks. Straight stir with a dedicated quadrant mounted on the square stirring head. The steering wheel is mounted horizontally; A small gear on the axle grabs in the rudder's quadrant.
RM
6188-54818567
Vintage Ancient italian olive oil machine used to make oil, oil mill Ancient italian olive oil machine used to make oil Copyright: xZoonar.com/albertoxgiacomazzix 13048316
RM
6145-59494161
Model of a Masting Sheer, 's Lands Werf Hellevoetsluis (Possible), c. 1797 - c. 1807 demonstration model Model of a mastbok on a ground board that represents a bank. The two legs, connected to a heavy crossbar and a hood, leaning ahead and are retained by two braces and six stages. The legs are on a wall with a semicircular recess. The Stagen are attached to hooks in the ground with Juffer blocks, which are placed in an arc behind a work platform. The braces have slot -shaped traces on the platform, in which they can be guaranteed in several places. The platform covered an open hiding place, and can be removed, making the pile -ray visible. A wooden roll on the front edge of the platform and the servant behind the platform probably helped to manipulate the round wood. The two hoists are driven by treadmills, one on each side. The rope runs from the axis of his treadmill through a three -disc block at the top and a double hoist block, from the three -disc block back through a servant at
RM
6145-59504443
Model of a 30-Pounder Gun on Deck, c. 1828 demonstration model. gunmodel Model of a cannon of 30 pounds on Marshall-Dekuit on a ship's part with part of the ship's wall, incomplete. The wooden loop, 22.5-23 cm long, is not drilled; It has a flat grape with a brush ring. The Affuit consists of two parts. The front part is stuck with a pivot bolt in heavy brass brackets on the gate threshold; It is a heavy wooden block with a transverse roller underneath for baking and a heavy metal mik on top of which the loop lies in the saddle. The rear -off, becoming narrower from the front, consists of two cheeks with four stairs each, connected by a sloping calf, an axle shift behind and a bolt through both cheeks in the middle. The taps are fitted against the cheeks. The axle body is attached to the cheeks with brackets. The hoist is incomplete. A brush runs from the sides of the gate through the brush ring; A second breach is attached to the cheeks of the back -off and lies around the map on whic
RM
6145-59494850
Model of a Prototype Dispatch Vessel, anonymous, c. 1833 scale model. demonstration model Model of a catamaran propelled on handklower. The two floats are connected to each other with slats at the ends and each have a place for a driver. The pre-moving mechanism consists of a single scoop wheel with counter-weights, set in motion on each side by means of handles. Both floats have a rudder, the helmet sticks of which are connected to each other with a hinged rod; They are operated with a steering talie that runs over disks. Amsterdam wood (plant material). brass (alloy). iron (metal). rope
RM
6145-29152047
Jewelry Box ca. 2051-1981 B.C. Middle Kingdom This box is divided into two compartments, each closed with a sliding lid. The end batton of each lid has a hole for fitting a small knob. The two knobs could be tied together to seal the box.The box was found in a tomb that also contained a "seweret" bead (25.3.252) and an exquisite "sa" amulet (25.3.253).. Jewelry Box. ca. 2051-1981 B.C.. Wood. Middle Kingdom. From Egypt, Upper Egypt, Thebes, Deir el-Bahri, Temple of Mentuhotep II, North Triangular Court, Pit 23 (tattooed woman), MMA excavations, 1922-23. Dynasty 11
Royalty Free License
Royalty-Free Standard Commercial licenses are granted for worldwide, non-exclusive and perpetual use, unless specifically noted otherwise. All Royalty-Free transactions are final. The Royalty-Free Standard Commercial license has no limitations and covers up to 15 users.
  • $50.00 Low333 X 500
  • $150.00 Med500 X 750
  • $250.00 High3415 X 5122
$1,225.00
RF High / Super Res 5 Pack
Save $25.00
$245.00
per download
Looking for a license?
Click here, and we'll help you find it! Questions? Just ask!
DETAILS
Image Number: 1795R-6621Royalty FreeCredit Line:Tetra Images/SuperStockCollection:Tetra ImagesStory:Antique Mechanical ModelsContributor:Tetra ImagesModel Release:NoProperty Release:NoResolution:3415×5122
antique
close up|
close-up|
color|
Color Image|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|