Model of a Ship's Bow in frames. Technical model of a fore ship over the length of four trusses of creation. Two apostles; three clamp plates on either side; under the tire vertical spheres; Curved steep. Two decks are schematically indicated. Four trusses of creation, one detailed (5 parts). Seven sents. One stut has been demolished.

Model of a Ship's Bow in frames. Technical model of a fore ship over the length of four trusses of creation. Two apostles; three clamp plates on either side; under the tire vertical spheres; Curved steep. Two decks are schematically indicated. Four trusses of creation, one detailed (5 parts). Seven sents. One stut has been demolished.
SuperStock offers millions of photos, videos, and stock assets to creatives around the world. This image of Model of a Ship's Bow in frames. Technical model of a fore ship over the length of four trusses of creation. Two apostles; three clamp plates on either side; under the tire vertical spheres; Curved steep. Two decks are schematically indicated. Four trusses of creation, one detailed (5 parts). Seven sents. One stut has been demolished. by Piemags/PL Photography Limited is available for licensing today.

Visually Similar More from Historic Ship Models story

RM
6145-59494749
Half Model of a Fireship, anonymous, 1770 - 1800 ship model. half model. builder's model Completely planks of a cheating model (starboard) of a one -mast flat bottom. The skin is partially left open to show the interior. Four levels: very low lower deck with flammable material spread over it; slightly higher a running corridor along the board and a gutter with flammable material to the lower deck; half -deck and baking deck supported by cover stans, a chimney on the baking deck; Upper Campanje. There are deck beams over the pit. A small gate in the fore ship, a large gate in the round stern; Eight rowing types. The Zeeg runs forward and back, triple barwood. Run with flat bottom. Netherlands wood (plant material). brass (alloy). paint (coating)
RM
6145-59495126
Model of A 20-inch Mortar on a Turntable, Rijkswerf Rotterdam, 1834 demonstration model Model of a cross -section of a ship with a 20 -inch mortar on rotary bed. The mortar, 5.1 cm for a long time and with a 15 mm caliber, has a round kulas and a dolphin on top. The chair consists of two parallel cheeks and two calves, causing brass assen; The axes have no wheels, but the chair slides into a sliding sled that is placed on a turning circle. This sledge has a slight slope and rolls on the bottom of its movement on the let -down turning clines on the deck, and a brass pivot bolt. The ship's part has a deck, supported with brass knees and brass cover stans under the mortar rack. Rotterdam wood (plant material). brass (alloy)
RM
6145-59494134
Model of the Outer Sill of the Lock at Flushing, Rijkswerf Vlissingen, 1847 - 1848 builder's model Model of the outdoor threshold of the Zeedoksluis in Vlissingen that the improvements and repair work performed in 1847-1848 shows on the lock floor. The stones of the lock floor are each presented by a loose and numbered piece of wood, which can all be removed as with a puzzle. The model also shows details of the pile foundation. Scale 1:50 (scale on model). Flushing wood (plant material). brass (alloy) Flushing
RM
6145-59501013
Model of a Jolly Boat, anonymous, 1756 ship model. fully rigged model. show model Polychromed clamping model of a witnessed sloop. Netherlands wood (plant material). oak (wood)
RM
6145-46803064
Spoon
RM
6145-59495485
Model of A 74-Gun Ship of the Line, Rijkswerf Vlissingen (Possible), c. 1833 demonstration model Construction model, vertically cut in the length, the halves based on braces on a ground board. Spant model without skin or shelling, intended to show the differences in the construction of cross -context according to Sir Robert Seppings (port half) and Cornelis Soetermeer (starboard half). With Soetermeer's system, the pulling parts of Seppings' cross bandage are left out of the spacious and replaced by metal strips outside on the wooden under the skin. On portboard, the fore ship only has vertical filling pieces, horizontal tires on starboard. Round stern with Wulf and Hek of two floors, without details or side galleries. Ninety -ninety gun gates spread over three decks. Five decks: cow bridge deck, lower, intermediate and upper deck and upper championship: lower and intermediate deck have a diagonal order in the web, the deck beams of all decks except the cow bridge are supported by bras
RM
6145-59495286
Model of a Figurehead, anonymous, 1800 - 1850 scale model Model of a sheg image on Scheg, on a ground board. The figure consists of a men's head, which is crowned with a laurel wreath by a harpij above him; The harpij also blows on a trumpet, which, however, is missing S bute with the right arm. The Scheg and the floor board are decorated with leaf work in relief. The figure represents Van Oldenbarneveldt, crowned by fame. Netherlands wood (plant material) Historical Persons. Hunger; 'Fama', 'Good fame', 'Chiara fame' (Ripa)
RM
6145-30189172
Crossbow 1660-1700 Germany. Wood, steel, staghorn, cord, and silk fiber .
RM
4443-28726835
Coconut-grater stool, mid 20th century, 7 1/16 x 22 x 5 3/4 in. (17.94 x 55.88 x 14.61 cm) (unfolded), Wood, metal, Tanzania, 20th century, Youd be hard-pressed to identify this mysterious, almost dangerous-looking object—unless youre familiar with coconut grating along the Swahili coast of East Africa. Then its fairly straightforward: you sit on the stool and scrape the inside of an opened coconut on the protruding metal blade. The coconut shavings are collected and later pushed through a sieve to make coconut milk. The X-shape of the stool resembles a Quran stand, while the geometric designs show both Arab and Indian influences on Swahili culture.
RM
6145-52953643
Pair of wall pedestals British ca. 1775 View more. Pair of wall pedestals. British. ca. 1775. Mahogany and mahogany veneer inlaid with boxwood. Woodwork-Furniture
RM
6145-59052200
Standing hanger; 1. W. 20th century (1901-00-00-1925-00-00);
RM
6145-58877100
Model of a car on four wheels, Anonymous, 1700 - 1800 Model of a car on four wheels, with cut walls. The car is painted paint -colored and deposited with vermilion. Toys. Northern Netherlands (possibly)Netherlands (possibly) wood (plant material). vermilion (pigment). rope Model of a car on four wheels, with cut walls. The car is painted paint -colored and deposited with vermilion. Toys. Northern Netherlands (possibly)Netherlands (possibly) wood (plant material). vermilion (pigment). rope
RM
6145-59494564
Half Model of a 74-Gun Ship of the Line, anonymous, c. 1750 - c. 1800 ship model. half model. builder's model Mallen model (port) of a ship, small back plate. No guns, no decks except baking deck, half -deck and upper campaign indicated by Gillingen. Get mirror, Hol Wulf, no details of fence or side gallery; No rudder. Seeping backwards. The sentences between the lower mountain wood and the reehout are wider than those of the underwater ship. Span, swept a stern. Netherlands (possibly) wood (plant material)
RM
6145-59500458
Model of a Whaleboat, anonymous, 1750 - 1850 ship model Model of an overnail twelve -frierms double bank whale sloop on standard. The vessel is a pointed hole with raised floor, the middle parts of which are missing. All dids are also missing. On the board twelve and another four on one side. The middle floor bar has an eye. unknown wood (plant material)
RM
6145-59535284
Model of A Lifeboat Release, Rijkswerf Vlissingen (Possible), After Clifford, 1857 - c. 1858 demonstration model Model of a part of a ship's wall with a sloop on two nail dravits. The hoist, which runs from a roasting spindle under the middle doft over a number of discs, is incomplete and the effect remains unclear. model maker: Flushingafter design by: United Kingdom wood (plant material). brass (alloy). rope
RM
6145-59495262
Model reconstruction of a single-masted ship excavated at Capelle, Johannes Petrus Scholten (attributed to), 1822 ship model. hull model. reconstruction model Quite coarse model of a one -mast ship without rig. It is an overnail flat -bottomed pointed hole with straight, falling Stevens. Field beams indicate a head deck, and the model has a front and back pile with shutters. There is a roasting spindle on the back pile, two pump pipes on the forecourt. In the spacious, a part is shot shot. The Zeeg rises to both ends, the model has one barkhout. A mast track, a mast holder and chain putters of the rig are indicated. The model is a reconstruction of the vessel that was discovered on 22 February 1822 in Capelle in the Langstraat and then dug up. It is made entirely of material from the original ship. Reconstruction model. Waalwijk wood (plant material). iron (metal) Geertruidenberg. Capelle
RM
6145-58932730
Club -
RM
6145-59495081
Model of A Carriage For A 30-Pounder Carronade, Rijkswerf Hellevoetsluis, 1854 demonstration model Model of a slider for a carronade of 30 pounds with baking sink and stelwig. The body consists of two beams in a longitudinal direction with batter and rings, located on two heavy cross beams. The beams in the longitudinal direction are completed at the front; On top are the ears with tapas on the front and behind batter with the track in front of the Eleveers screw. Two slats are installed diagonally over the beams in the middle, between which an asymmetrical stelwig runs. The transverse beams stand out outside the Langsbalken for extra stability and are on friction closses to limit the recuula. Two small rollers on a hinge against the rear can, with the help of the baking sucker, boost the back of the canvas; The Affuit then also rests on two wooden rollers, which are applied for the front crossbar, and is so easy to roll on board. Scale 1: 5 (derived). model maker: Hellevoetsluisafter
RM
6145-30144256
Model of An Apparatus for Testing The Strength or Rope. Model of a device to test the strength of rope, incomplete: the base board and different parts are missing. It consists of a framework with a rollerwork (ratio 12.25 / 1) on one side with a screw end, a hydraulic pump on the other side. The rope is pulled between the two and pulled out with the wheeler. The pump is a cylinder with piston and an outlet on top. In addition to the exhaust, a lever is mounted on a support. Glue residues show that the same kind of support was seated on the Cylinder House.
RM
6145-30144158
Model or a 44-gun ship of the line.Rull model of a biplane, above the water line. 42 guns are applied over the length of two decks. Fence, mirror and wull are missing.
Royalty Free License
Royalty-Free Standard Commercial licenses are granted for worldwide, non-exclusive and perpetual use, unless specifically noted otherwise. All Royalty-Free transactions are final. The Royalty-Free Standard Commercial license has no limitations and covers up to 15 users.
  • $50.00 Low500 X 375
  • $150.00 Med750 X 562
  • $250.00 High2500 X 1875
$1,225.00
RF High / Super Res 5 Pack
Save $25.00
$245.00
per download
Order a Framed Print
Looking for a license?
Click here, and we'll help you find it! Questions? Just ask!
DETAILS
Image Number: 6145-45802476Royalty FreeCredit Line:Piemags/PL Photography Limited/SuperStockCollection:PL Photography LimitedStory:Historic Ship ModelsContributor:PiemagsModel Release:NoProperty Release:NoResolution:2500×1875