Model or a carronade on a slide. Model of a carronade on sliding slide on a bound board a portion of a ship deck representing. The carronade has a caliber of 21 (16.6) mm and is 29 cm long. The loop has a locking hardener with a visor, a visor on the tap band and a pierce ring and an elevation screw through the grape; The elevation screw is covered with a rainy cap. The top piece has a slightly trapez-shaped body with brass attachment and rings, the front and back are rounded. Against the back the baking koker in brass fittings, on top of a brass plate to support the elevation screw and on the front the ears through which the tapas runs; The swirl bolt runs between the layers of the underled. The underlay consists of a wooden frame with brass fittings that allowed something to the front and finished in front. Cemeted in the middle and behind, including wheels are attached; The rear wheels can swing. A baking sleeve is applied in the back of the frame. The base board represents a part o

Brand: PL Photography Limited
SKU: 6145-30143079
Availability: InStock

Model or a carronade on a slide. Model of a carronade on sliding slide on a bound board a portion of a ship deck representing. The carronade has a caliber of 21 (16.6) mm and is 29 cm long. The loop has a locking hardener with a visor, a visor on the tap band and a pierce ring and an elevation screw through the grape; The elevation screw is covered with a rainy cap. The top piece has a slightly trapez-shaped body with brass attachment and rings, the front and back are rounded. Against the back the baking koker in brass fittings, on top of a brass plate to support the elevation screw and on the front the ears through which the tapas runs; The swirl bolt runs between the layers of the underled. The underlay consists of a wooden frame with brass fittings that allowed something to the front and finished in front. Cemeted in the middle and behind, including wheels are attached; The rear wheels can swing. A baking sleeve is applied in the back of the frame. The base board represents a part o

SuperStock offers millions of photos, videos, and stock assets to creatives around the world. This image of Model or a carronade on a slide. Model of a carronade on sliding slide on a bound board a portion of a ship deck representing. The carronade has a caliber of 21 (16.6) mm and is 29 cm long. The loop has a locking hardener with a visor, a visor on the tap band and a pierce ring and an elevation screw through the grape; The elevation screw is covered with a rainy cap. The top piece has a slightly trapez-shaped body with brass attachment and rings, the front and back are rounded. Against the back the baking koker in brass fittings, on top of a brass plate to support the elevation screw and on the front the ears through which the tapas runs; The swirl bolt runs between the layers of the underled. The underlay consists of a wooden frame with brass fittings that allowed something to the front and finished in front. Cemeted in the middle and behind, including wheels are attached; The rear wheels can swing. A baking sleeve is applied in the back of the frame. The base board represents a part o by Piemags/PL Photography Limited is available for licensing today.

Royalty Free License

Royalty-Free Standard Commercial licenses are granted for worldwide, non-exclusive and perpetual use, unless specifically noted otherwise. All Royalty-Free transactions are final. The Royalty-Free Standard Commercial license has no limitations and covers up to 15 users.