Futuristic empty platform in metaverse virtual reality 3D rendering

Futuristic empty platform in metaverse virtual reality 3D rendering
SuperStock offers millions of photos, videos, and stock assets to creatives around the world. This image of Futuristic empty platform in metaverse virtual reality 3D rendering by HuberStarke/Westend61 is available for licensing today.

Visually Similar More from Space Technology Infrastructure story

RM
1801-64348591
national space centre interior view from the balcony over the main foyer
RM
6145-44775336
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the crane lowers the Multi-Purpose Logistics Module Leonardo into the payload canister. The canister will transport the module to Launch Pad 39A for installation in space shuttle Discovery for the STS-128 mission. The module will carry science and storage racks to the International Space Station. Launch is targeted for Aug. 18.
RM
4382-168
The US Air Force X-37B Orbital Test Vehicle during encapsulation within the United Launch Alliance Atlas V 5-meter fairing February 8, 2011, at Astrotech in Titusville, Florida. The fairing protects and carries the OTV into space.
RM
6145-44581753
KENNEDY SPACE CENTER, FLA. -- Inside the Space Station Processing Facility, the P1 Truss Segment is lowered into the payload canister. The P1 truss is the primary payload for Mission STS-113. It is the first port truss segment which will be attached to the Stations central truss segment, S0. Once delivered, the P1 truss will remain stowed until flight 12A.1. The mission will also deliver the Expedition 6 crew to the Station and return Expedition 5 to Earth. Space Shuttle Endeavour is scheduled to launch no earlier than Nov. 10 on the 11-day mission.
RM
6145-44739112
Vertical Motion Simulator (VMS) showing a Space Shuttle configuration
RM
4409-21484883
SALA DE CONTROL DE RECEPCION DE DATOS VIA SATELITE. Location: ESTACION DE COMUNICACIONES. BUITRAGO DEL LOZOYA. MADRID. SPAIN.
RM
6145-44711591
CAPE CANAVERAL, Fla. - In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, equipment is stacked for the flight support system (FSS) access scaffolding that will be used to prepare the Hubble Space Telescope, or HST, carriers for the STS-125 servicing mission 4. The FSS will berth, secure and furnish power to Hubble and also contains the soft capture mechanism to be attached to the telescope. Upon completion of STS-125, the Hubble will provide even deeper and more detailed views of the Universe. The STS-125 mission will be the final space shuttle mission to the Hubble Space Telescope.
RM
6145-44718045
The new centrifuge at MSC, located in the Flight Acceleration Facility (FAF), Bldg. 29. The 50-ft. arm can swing the 3-man gondola to create G-Forces Astronauts will experience during liftoffs and re-entry conditions. MSC, HOUSTON, TX CN
RM
4315-213
SR-71 Engine Air Inlets
RM
6145-45241803
Sikorsky Bearingless Main rotor (SBMR) mounted on the Ames Rotor Test Apparatus (RTA) for testing in the NASA Ames40x80ft Subsonic Wind Tunnel, test-584.
RM
6145-45200374
A display of artifacts featuring nine items recovered from the STS-107 tragedy that occurred Feb. 1, 2003, is shown in the old Headquarters Building at Kennedy Space Center. The powerful exhibit can now be viewed in the lobby of the Florida spaceports new Central Campus Building until June 10. The exhibit is part of the space shuttle Columbia national tour, which will make its way to all 10 NASA centers throughout the country.
RM
6145-45100804
Launch Vehicle Stage Adapter (LVSA) Aft Cone Weld #7
RM
6145-44498512
KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery stands in a vertical position in the Vehicle Assembly Building while it is connected to the solid rocket boosters and external tank that will be used to launch mission STS-103 in early December. This 10-day mission is designed to replace aging parts on the nine-year-old Hubble Space Telescope and to upgrade some of its functioning systems. During the flight, the astronaut crew will replace all six of the observatory's gyroscopes, a fine guidance sensor, its main computer, and other equipment
RM
6145-44892020
T&R/Atlantis, Locker Installation in Mid-Deck
RM
1801-62974669
View of stage apparatus. Attenborough Centre, Brighton, United Kingdom. Architect: RH Partnership, 2015.
RM
6145-54453793
Overall view of the Space Shuttle Enterprise in launch position on the Space Launch Complex (SLC) #6, commonly known as "SLICK 6", during the ready-to-launch checks to verify launch procedures. Exact Date Shot Unknown. Base: Vandenberg Air Force Base State: California (CA) Country: United States Of America (USA)
RM
6145-45066982
SAN DIEGO, Calif. - The Orion boilerplate test vehicle is secured on its cradle in the well deck of the U.S. Navy's USS Anchorage in preparation for Underway Recovery Test 2 in the Pacific Ocean off the coast of San Diego. A safety barrier has been installed near the test vehicle to keep it from going further into the well deck as it fills with water. NASA, Lockheed Martin and the U.S. Navy will conduct the test to prepare for recovery of the Orion crew module on its return from a deep space mission. The underway recovery test will allow the team to demonstrate and evaluate the recovery processes, procedures, new hardware and personnel in open waters.The Ground Systems Development and Operations Program is conducting the underway recovery test. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entr
RM
6145-44661247
KENNEDY SPACE CENTER, FLA. -- The orbiter Discovery is lowered toward the mobile launcher platform in high bay 3 of the Vehicle Assembly Building. Behind the vehicle are the external tank and solid rocket boosters already stacked on the MLP. Discovery will be mated to the stack in preparation for launch. Space Shuttle Discovery is scheduled to roll out to Launch Pad 39B no earlier than Nov. 7 for mission STS-116. The mission is No. 20 to the International Space Station and construction flight 12A.1. The mission payload is the SPACEHAB module, the P5 integrated truss structure and other key components. The launch window for mission STS-116 opens Dec. 7.
RM
6145-44968765
The model of the Space Launch System for the Orion Space Capsule is being prepared for windtunnel test in the 14x22 Subsonic windtunnel at NASA Langley.
RM
1525-21999698
Back of guitar amp, symbol for music
RM
6145-45206766
NASAs 2017 astronaut candidates practice flying in an X-59 QueSST simulator at Armstrong Flight Research Center, in Southern California. The low boom flight demonstrator, X-59, being built at Lockheed Martin and was designed to supersonically over land without the loud noise of breaking the sound barrier and disturbing communities.
Royalty Free License
Royalty-Free Standard Commercial licenses are granted for worldwide, non-exclusive and perpetual use, unless specifically noted otherwise. All Royalty-Free transactions are final. The Royalty-Free Standard Commercial license has no limitations and covers up to 15 users.
  • $50.00 Low500 X 375
  • $150.00 Med750 X 562
  • $250.00 High6000 X 4500
$1,225.00
RF High / Super Res 5 Pack
Save $25.00
$245.00
per download
Order a Framed Print
Looking for a license?
Click here, and we'll help you find it! Questions? Just ask!
DETAILS
Image Number: 1815-71548482Royalty FreeCredit Line:HuberStarke/Westend61/SuperStockCollection:Westend61Story:Space Technology InfrastructureContributor:HuberStarkeModel Release:NoProperty Release:NoResolution:6000×4500
3D
abstract|
architecture|
boundary|
cgi|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|