CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASAs Kennedy Space Center in Florida, workers prepare space shuttle Endeavour for its move, or "rollover," from its hangar to the Vehicle Assembly Building. Endeavour and its STS-134 crew will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer, spare parts, a high-pressure gas tank, additional spare parts for Dextre and micrometeoroid debris shields to the International Space Station. Launch is targeted for April 19 at 7:48 p.m. EDT.

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASAs Kennedy Space Center in Florida, workers prepare space shuttle Endeavour for its move, or "rollover," from its hangar to the Vehicle Assembly Building. Endeavour and its STS-134 crew will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer, spare parts, a high-pressure gas tank, additional spare parts for Dextre and micrometeoroid debris shields to the International Space Station. Launch is targeted for April 19 at 7:48 p.m. EDT.
SuperStock offers millions of photos, videos, and stock assets to creatives around the world. This image of CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASAs Kennedy Space Center in Florida, workers prepare space shuttle Endeavour for its move, or "rollover," from its hangar to the Vehicle Assembly Building. Endeavour and its STS-134 crew will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer, spare parts, a high-pressure gas tank, additional spare parts for Dextre and micrometeoroid debris shields to the International Space Station. Launch is targeted for April 19 at 7:48 p.m. EDT. by Piemags/PL Photography Limited is available for licensing today.

Visually Similar More from Space Shuttle Processing story

RM
6145-44881115
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASAs Kennedy Space Center in Florida, United Space Alliance technicians help to install space shuttle Endeavours left orbital maneuvering system OMS pod. The OMS pod underwent complete deservicing and cleaning at White Sands Space Harbor in New Mexico, part of the transition and retirement processing of each shuttle. Endeavour is being prepared for public display at the California Science Center in Los Angeles. Over the course of its 19-year career, Endeavour spent 299 days in space during 25 missions.
RM
6145-44875706
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-1 at NASAs Kennedy Space Center in Florida, an overhead crane is used to remove shuttle Endeavours left-hand orbital maneuvering system, or OMS, pod. The work is part of Endeavours transition and retirement processing. The spacecraft is being prepared for public display at the California Science Center in Los Angeles. Endeavour flew 25 missions, spent 299 days in space, orbited Earth 4,671 times and traveled 122, 883, 151 miles over the course of its 19-year career. Endeavours STS-134 and final mission was completed after landing on June 1, 2011.
RM
6145-45016870
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASAs Kennedy Space Center in Florida, a crane carries an orbital maneuvering system (OMS) pod closer to space shuttle Discovery. The OMS pod will be installed on Discovery. The OMS pod was returned from White Sands Space Harbor in New Mexico where it underwent a complete deservicing and cleaning. The work is part of the Space Shuttle Programs transition and retirement processing of space shuttle Discovery. The shuttle will go to the Smithsonians National Air and Space Museum, Steven F. Udvar-Hazy Center in Chantilly, Va., in April 2012.
RM
6145-45030795
CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida, an employee guides a replica shuttle main engine (RSME) toward installation on space shuttle Discovery. This is the first of three replica engines to be installed. The work is part of the Space Shuttle Programs transition and retirement processing of Discovery. Discovery is being prepared for display at the Smithsonians National Air and Space Museum, Steven F. Udvar-Hazy Center in Chantilly, Va.
RM
6145-58959711
CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-2 at NASAs Kennedy Space Center in Florida, a large crane with support equipment begins to remove space shuttle Atlantis left orbital maneuvering system (OMS) pod. The work is part of the Space Shuttle Programs transition and retirement processing of shuttle Atlantis. The OMS pods will be sent to White Sands Space Harbor in New Mexico where they will undergo a complete deservicing and cleaning and then be returned to Kennedy for reinstallation on Atlantis. Atlantis is being prepared for display at the Kennedy Space Center Visitor Complex in Florida.
RM
6145-44691719
KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, technicians on a Hyster forklift maneuver space shuttle main engine no. 1 into place on Endeavour. Each space shuttle main engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. The orbiter is targeted for launch on Feb. 14 for mission STS-123 to the International Space Station.
RM
6145-44896318
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 2 at NASAs Kennedy Space Center in Florida, technicians use the Hyster forklift to install replica shuttle main engine RSME number 3 on the space shuttle Endeavour.The work is part of Transition and Retirement of the remaining space shuttles, Endeavour and Atlantis. Endeavour is being prepared for public display at the California Science Center in Los Angeles. Its ferry flight to California is targeted for mid-September. Endeavour was the last space shuttle added to NASAs orbiter fleet. Over the course of its 19-year career, Endeavour spent 299 days in space during 25 missions.
RM
6145-44896087
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 2 at NASAs Kennedy Space Center in Florida, replica shuttle main engine RSME number 1 has been installed on space shuttle Endeavour. The orbiter is surrounded by work platforms allowing access to all areas of the spacecraft.The work is part of Transition and Retirement of the remaining space shuttles, Endeavour and Atlantis. Endeavour is being prepared for public display at the California Science Center in Los Angeles. Its ferry flight to California is targeted for mid-September. Endeavour was the last space shuttle added to NASAs orbiter fleet. Over the course of its 19-year career, Endeavour spent 299 days in space during 25 missions.
RM
6145-44857994
Discovery T & R, Oms Pod Rotate for Removal
RM
6145-44617583
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, the Forward Reaction Control System (FRCS) is lowered toward Discoverys forward fuselage nose area where it will be installed. The FRCS provides the thrust for attitude (rotational) maneuvers (pitch, yaw and roll) and for small velocity changes along the orbiter axis (translation maneuvers). Discovery is designated as the Return to Flight vehicle for mission STS-114, no earlier than March 2005.
RM
6145-44597706
KENNEDY SPACE CENTER, FLA. - International Space Station elements being processed for launch on upcoming Space Shuttle flights, including the U.S. Node 2, line the walls of the high bay in the Space Station Processing Facility. NASA's Node 2, built by the European Space Agency (ESA) in Italy, arrived at KSC on June 1. It will be the next pressurized module installed on the Station.
RM
6145-44891190
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASAs Kennedy Space Center in Florida, United Space Alliance technicians align the forward reaction control system onto space shuttle Atlantis during the systems reinstallation on the shuttle. The system helped the shuttle maneuver while it was in orbit. Atlantis FRCS was removed and sent to White Sands Test Facility in New Mexico to be cleaned of its toxic propellants. The work is part of the Space Shuttle Programs transition and retirement processing of the shuttle fleet. A groundbreaking was held Jan. 18 for Atlantis' future home, a 65,000-square-foot exhibit hall in Shuttle Plaza at the Kennedy Space Center Visitor Complex. Atlantis is scheduled to roll over to the visitor complex in November in preparation for the exhibits grand opening in July 2013.
RM
6145-44998604
CAPE CANAVERAL, Fla. - Inside the Operations and Checkout Building high bay at NASAs Kennedy Space Center in Florida, a ground support tool attached to a crane is used to lift the service module for the Orion spacecraft from a stand. The service module is being transferred to a static test stand. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on NASAs Space Launch System rocket.
RM
6145-58968034
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-1 at NASAs Kennedy Space Center in Florida, an orbital maneuvering system, or OMS, pod glides across the ceiling toward space shuttle Atlantis on which it will be installed.The orbital maneuvering system provided the shuttle with thrust for orbit insertion, rendezvous and deorbit, and could provide up to 1,000 pounds of propellant to the aft reaction control system. The OMS is housed in two independent pods located on each side of the shuttle's aft fuselage. Each pod contains one OMS engine and the hardware needed to pressurize, store and distribute the propellants to perform the velocity maneuvers. Atlantis OMS pods were removed and sent to White Sands Test Facility in New Mexico to be cleaned of residual toxic propellant. The work is part of the Space Shuttle Programs transition and retirement processing of the shuttle fleet. A groundbreaking was held Jan. 18 for Atlantis' future home, a 65,000-square-foot exhibit hall in Shuttle
RM
6145-44563817
Pressurized Mating Adapter (PMA)-2 is moved into position to be mated to Node 1 of the International Space Station (ISS) by Boeing technicians in KSC's Space Station Processing Facility (SSPF). The node is the first element of the ISS to be manufactured in the United States and is currently scheduled to lift off aboard the Space Shuttle Endeavour on STS-88 later this year, along with PMAs 1 and 2. This PMA is a cone-shaped connector to Node 1, which will have two PMAs attached once this mate is completed. Once in space, Node 1 will function as a connecting passageway to the living and working areas of the ISS. It has six hatches that will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other space station elements
RM
6145-44638818
KENNEDY SPACE CENTER, FLA. - The Forward Reaction Control System (FRCS) of space shuttle Atlantis sits in the transfer aisle of Orbiter Processing Facility Bay 1 in anticipation of being installed. The FRCS provides the thrust for attitude (rotational) maneuvers (pitch, yaw and roll) and for small velocity changes along the orbiter axis (translation maneuvers). Processing of Atlantis is under way for mission STS-115, the 19th flight to the International Space Station.
RM
6145-44894713
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility Bay 1 at NASAs Kennedy Space Center in Florida, technicians use the Hyster forklift to install replica shuttle main engine RSME number 2 on the space shuttle Atlantis.Three RSMEs were installed on Atlantis. The replicas were built in the Pratt & Whitney Rocketdyne engine shop at KSC to replace the space shuttle main engines SSMEs which will be placed in storage to support NASA's Space Launch System currently under development. The RSME installation is part of the Space Shuttle Programs transition and retirement processing of the space shuttle fleet. A groundbreaking was held Jan. 18, 2012 for Atlantis future home, a 65,000-square-foot exhibit hall in Shuttle Plaza at the Kennedy Space Center Visitor Complex. Atlantis is scheduled to roll over to the visitor complex during November in preparation for the exhibits grand opening in July 2013.
RM
6145-44818352
STS-133 DISCOBVERY ENGINE-3 REMOVAL IN OPF-3 AND XFERRED TO ENGINE SHOP
RM
6145-58960122
CAPE CANAVERAL, Fla. - In Orbiter Processing Facility-3 at NASA's Kennedy Space Center in Florida, the multi-purpose logistics module Leonardo and an ammonia tank assembly glide across the room from space shuttle Discovery's payload bay toward a payload canister. Discovery landed on Runway 33 at Kennedy's Shuttle Landing Facility at 9 08 a.m. EDT April 20 after 15 days in space, completing the more than 6.2-million-mile STS-131 mission on orbit 238. The seven-member STS-131 crew carried the multi-purpose logistics module Leonardo, filled with supplies, a new crew sleeping quarters and science racks that were transferred to the International Space Station's laboratories. Leonardo now will be modified into a permanent multi-purpose module, or PMM, and left aboard the station on space shuttle Discovery's STS-133 mission, targeted for launch Sept. 16.
RM
6145-45136202
NASA engineers install test hardware for the agency's new heavy lift rocket, the Space Launch System, into a newly constructed 50-foot structural test stand at NASA's Marshall Space Flight Center. In the stand, hydraulic cylinders will be electronically controlled to push, pull, twist and bend the test article with millions of pounds of force. Engineers will record and analyze over 3,000 channels of data for each test case to verify the capabilities of the engine section and validate that the design and analysis models accurately predict the amount of loads the core stage can withstand during launch and ascent. The engine section, recently delivered via NASA's barge Pegasus from NASA's Michoud Assembly Facility, is the first of four core stage structural test articles scheduled to be delivered to Marshall for testing. The engine section, located at the bottom of SLS's massive core stage, will house the rocket's four RS-25 engines and be an attachment point for the two solid rocket boos
RM
6145-45168932
The United Launch Alliance (ULA) Crew Flight Test dual engine, at left, and the Orbital Flight test dual engine, at right, for the Centaur stage of the Atlas V rocket are in production on June 11, 2018, at ULA's factory in Decatur, Alabama. Boeing's CST-100 Starliner will launch on its first uncrewed flight test on the ULA Atlas V rocket. The Starliner is being developed and manufactured in partnership with NASA's Commercial Crew Program to return human spaceflight capabilities to the U.S.
Image - Royalty Free Editorial
Royalty-Free Standard Editorial licenses are granted for worldwide, non-exclusive and perpetual NON-COMMERCIAL uses, unless specifically noted otherwise. All Royalty-Free transactions are final. The Royalty-Free Standard Editorial license has no limitations and covers up to 15 users.
  • $50.00 Low500 X 333
  • $150.00 Med750 X 500
  • $250.00 High3000 X 2000
Order a Framed Print
Looking for a license?
Click here, and we'll help you find it! Questions? Just ask!
DETAILS
Image Number: 6145-44849921Royalty FreeCredit Line:Piemags/PL Photography Limited/SuperStockCollection:PL Photography LimitedStory:Space Shuttle ProcessingContributor:PiemagsModel Release:NoProperty Release:NoResolution:3000×2000
Endeavour
Rollover|
STS-134|