Borstel.Rectangular brush with a long turned stem. The handle has a profiled end with a ring. The brush has not been marked.

Borstel.Rectangular brush with a long turned stem. The handle has a profiled end with a ring. The brush has not been marked.
SuperStock offers millions of photos, videos, and stock assets to creatives around the world. This image of Borstel.Rectangular brush with a long turned stem. The handle has a profiled end with a ring. The brush has not been marked. by Piemags/PL Photography Limited is available for licensing today.

Visually Similar More from Historic Metal Casting Tools story

RM
4443-21913644
Four-piece bronze mold for bottom of pot or jug, mold casting tool tools equipment base metal bronze , cast Four-piece bronze mold for bottom of pot or jug Rotterdam tin tinker tin tin Meeuws Druy artisan Shapes are from the originally 18th century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster.
RM
6145-46669238
Model of a pètard. Model of a Petarde, also referred to in the Netherlands with the term jumping bus. The petarde was used to inflate wooden doors from city gates and fortress walls. De Petarde was secretly applied to the city gate after which the gunpowder was brought into inflammation in the bronze or iron mortar. The petarde is a French invention that was also used in the State Army at the end of the sixteenth century. In the course of the 18th century, the petari became disused by changes in the fortress war.
RM
4443-21916152
Two-piece bronze mold for dish, mold casting tool tools base metal bronze, cast turned Two-piece bronze mold for pouring bowl with stand ring top: 2834 1 Rotterdam tin foundry tin stain tin Meeuws Druy craft Shapes originate from the origin 18th century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster.
RM
4443-21913453
Four-piece bronze mold for salt shaker, mold casting tool tools base metal bronze, cast turned Four-piece bronze mold for casting salt vessel with round base Rotterdam tin foundry tin stainer tin Meeuws Druy craft Shapes are from the van origins 18th century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster.
RM
1525-20392903
Old manual meat grinder on a wooden table
RM
6145-30117538
Gunlock (Flintlock) for a Carronade.Right cannon lock (flint lock) with brass house and iron lock mechanism, rooster and pandeschel. The slot is mounted with a pin in the lock support and a bolt through it. The pan has a hole that led the spark to the zundhole. The tractor has a retraction rope that is led upwards by a heavy ring.
RM
6145-29874323
Joseph Ficcadenti, Cannon shaped Ballot Box, c 1941 Cannon-shaped Ballot Box
RM
4443-21913633
Four-piece bronze mold for mortar with decoration, toys, mold casting tool tools kit metal_metal cast iron wood iron, cast turned Four-piece bronze mold for casting mortar with decorations of fish dog bird and plants as dolls Rotterdam tingieterij tinnegieter tin dolls Meeuws Druy craft Shapes are from the originally 18th century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster.
RM
6145-58853994
Komfoor, belonging to Koffiekan, on four bird claw legs, Anonymous, 1839 Silvery Komfoor. The rest on four high bent legs on bird claws. The grinding has a wall open with flower and leaf motifs and a smooth straight upper edge in which the right-wing base of the pot fits. Netherlands silver (metal). wood (plant material) Silvery Komfoor. The rest on four high bent legs on bird claws. The grinding has a wall open with flower and leaf motifs and a smooth straight upper edge in which the right-wing base of the pot fits. Netherlands silver (metal). wood (plant material)
RM
6145-59489400
Oplegslot, anonymous, c. 1600 An iron door lock, supposedly support lock with two shots that can be shifted through a key and the front by a lever -like handle. The lock plate starts rectangular at the final ring, broadens by two hollow sides and runs in a scaly convex side. Germany iron (metal)
RM
6145-59494860
Model of a Water Gauge, anonymous, 1845 - 1855 instrument. instruction model Model of a water level glass for steam boilers. The glass tube is caught in a copper tube. A crane with a flange is applied to both ends; The bottom was connected to the water and the top on the steam. At the bottom is a third crane, for cleaning and other purposes; The top end is closed with a nut. All gaskets are made of lead. The boiler water level was checked with this gauge glass. Netherlands (possibly) brass (alloy). copper (metal). lead (metal). glass
RM
6145-45809231
Model or a 16-cm Gun on a Pivot and Slide on part of a gun deck. Model of a drawn front loader on rotary and sliding meat on part of a ship deck. The brass loop, long 34 cm and with a 16 mm caliber, thickened at the tapping piece and thereafter again; No jewelry tires except the kulas band. The soul has been drawn with six grooves. The peling is in the neck of the grape and is locked up with a bracket. The piece has a percussion lock no. 1 (see NG-MC-1050), wherein the lock support protrudes behind the kulas band, where a setup can be attached. The upper suit consists of two cheeks, two shaft blocks without wheels, a sloping calft and a braking device. The elevation happened by means of an elevation screw on the rear axle block. The braking device, attached to the front shaft block, consists of a clamp to the carriage of the carriage, which is tightened with a screw. The affuit has four rollers against the short sides of the cheeks, which only go over the slide's shifts when the rear p
RM
6145-45848987
Model of a Carriage for a 68-pounder Gun. Model of an affit on a base board that represents a part of a deck with a gun port. The body is narrower forward. The cross band between the cheeks consists of a calf, a crossbar in the middle, the sole plate behind and the front asal; The rear wheels have no axle but hanging in brackets. The cheeks have three stairs. A slide has been applied between the axes and the calf and the sole plate behind, on which a brake works against the recuul; This friction brake consists of an eccentric shaft straight through the affit. The shaft has hand spokes at the ends, which can be placed in different positions with spokes in the cheeks, and presses a block against the calf, so that the weight of the coupling comes to the shaft, which is pressed on the carriage. The sled is a wooden frame with a spindle bolt in the gate threshold; The carriage has two small rollers with their axes radially compared to the spindle bolt. The model has brass eye bolts and othe
RM
4443-21916707
Two-piece bronze mold for lid of jug, mold casting tool tools base metal bronze, cast turned Two-piece bronze mold for casting lid with two bead edges for jug top: Rotterdam tinsite tin tins tin tableware Meeuws Druy craft Molds are from the originally 18th century Rotterdam tinnegieter J Druy. The large molds that were not signed or dated were the property of the tinker guild and were rented to the small tin caster.
RM
6145-30118081
Model Demonstrating the Movement of a Steam Valve.Moving demonstration model from an expansion device. The five-room steam slide is powered and arranged by a scissor movement on the crankshaft; One eccentric of the scissor movement can be placed in three different positions, the other can be controlled with a wheel. The crankshaft is operated with a crank.
RM
6145-29819703
Bronze horse muzzle 1st-2nd century A.D. Roman The cavalry was a minor part of the Roman army, whose main strength lay in the heavy infantrythe legions and their auxiliary cohorts. Some horsemen were attached to each legion, however, and there were special units, called alae, recruited from among barbarian nations that excelled in riding. The emperor and senior officers, too, had mounted escorts.. Bronze horse muzzle 248756
RM
6145-45588938
Tangent sight. Structure or direction that is mounted against the rear of the lock hardener, identical to NG-MC-1889-24-A. The aid is equipped with a hook that grabs into a slot hardener in a square notch, and is tightened with a screw from behind. It is a short square iron rod, on top of pyramid-shaped with grooves through the top; Can move vertically back and forth. The mounting rod has three sides with scales, five scales in total.
RM
6145-45793317
Model or a 30-pounder gun on a Pivot. Model of a canon of £ 30 on sliding and swiveled piece, on the aft deck of a paddle steam vessel. The wooden loop is 27.4 cm long, has a flat grape with pants ring and a visor on the tap band. The upper suit, to the front narrower, consists of two cheeks with four stairs, connected by a calf, a breastpiece and two cross beams that replace the aslas. The affit has no wheels. The cross beams are connected to the sole plate lengthwise. The Stelwig is missing. The carriage is a wooden frame, whereby the cage scanning is applied to the leggers on either side to protect the guns against gunfire. The turning peaks are applied to an elevated wooden circle, which is provided on the inside for two-thirds of a rack: a gear wheel that is arranged behind the carriage and with which the carriage rotates, cover the entire stern of port to starboard. The leggers have small rollers at the bottom for the movement of the carriage over the turning races. The guns are
RM
6145-59495112
Model of a 24-Pounder Breech-Loading Gun, anonymous, 1829 demonstration model Model of a long loading cannon of 24 pounds, incomplete. The loop is 34.25 cm long and has a caliber of 14 mm. A wedge straight through the Kulas holds the final piece in place; The final piece consists of the grape and the bottom of the room, which is pulled backwards from the Kulas. The Affuit is missing. Scale 1:10 (Obreen). Netherlands wood (plant material)
RM
6145-58875590
Schaaf from 1725, Anonymous, 1725 Schaaf from 1725, with hollow profile. Decorated with cutting. Marked on the block with the letters P.S.W. Northern Netherlands (possibly)Netherlands (possibly) wood (plant material). beech (wood). iron (metal) Schaaf from 1725, with hollow profile. Decorated with cutting. Marked on the block with the letters P.S.W. Northern Netherlands (possibly)Netherlands (possibly) wood (plant material). beech (wood). iron (metal)
Royalty Free License
Royalty-Free Standard Commercial licenses are granted for worldwide, non-exclusive and perpetual use, unless specifically noted otherwise. All Royalty-Free transactions are final. The Royalty-Free Standard Commercial license has no limitations and covers up to 15 users.
  • $50.00 Low500 X 500
  • $150.00 Med750 X 750
  • $250.00 High2100 X 2100
  • $350.00 Super High7000 X 7000
$1,225.00
RF High / Super Res 5 Pack
Save $525.00
$245.00
per download
Order a Framed Print
Looking for a license?
Click here, and we'll help you find it! Questions? Just ask!
DETAILS
Image Number: 6145-30087266Royalty FreeCredit Line:Piemags/PL Photography Limited/SuperStockCollection:PL Photography LimitedStory:Historic Metal Casting ToolsContributor:PiemagsModel Release:NoProperty Release:NoResolution:2500×1449
Borstel
brush|
handle|
marked|
Profiled|
|
|
|