SuperStock offers millions of photos, videos, and stock assets to creatives around the world. This image of by Ingram Publishing is available for licensing today.

Visually Similar More from Spacecraft and Rocket Assembly story

RM
6145-45111354
TWO CRANES LIFT THE APPROXIMATELY 8,000-POUND INTERIM CRYOGENIC PROPULSION STAGE TEST ARTICLE OUT OF ITS CRATE AT MARSHALL. THE TEST ARTICLE ARRIVED AT MARSHALL SPACE FLIGHT CENTER VIA BARGE ON THE TENNESSEE RIVER AND WAS TRANSPORTED TO BUILDING 4649 WHERE TESTING WILL BEGIN.
RM
6145-44624308
The Soyuz TMA-5 spacecraft is mated to its booster rocket in a processing hangar at the Baikonur Cosmodrome in Kazakhstan Monday, October 11, 2004, in preparation for its rollout to the launch pad October 12 and its liftoff October 14 to carry Expedition 10 Commander and NASA Science Officer Leroy Chiao, Flight Engineer and Soyuz Commander Salizhan Sharipov and Russian Space Forces cosmonaut Yuri Shargin to the International Space Station.
RM
6145-44566452
Technicians carefully lower an Integrated Equipment Assembly (IEA) onto a work stand in the Space Station Processing Facility at KSC . The IEA, a large truss segment of the International Space Station (ISS), is one of four power modules to be used on the International Space Station. The modules contain batteries for the ISS solar panels and power for the life support systems and experiments that will be conducted. This first IEA will fly on the Space Shuttle Endeavour as part of STS-97, scheduled to launch August 5, 1999
RM
6145-52108546
An intercontinental ballistic missile (ICBM) is erected after assembly. Base: Vandenberg Air Force Base State: California (CA) Country: United States Of America (USA)
RM
6145-52291939
Maintenance of a Lockheed F-104G Starfighter.
RM
6145-45032500
CAPE CANAVERAL, Fla. - Inside Orbiter Processing Facility-1 at NASAs Kennedy Space Center in Florida, technicians install a dome heat shield around one of space shuttle Discoverys three replica shuttle main engines.The dome heat shields are composed of two, semi-circle-shaped sections of thermal protection system tiles that surround the engines. The work is part of the Space Shuttle Programs transition and retirement processing of shuttle Discovery. Discovery is being prepared for display at the Smithsonians National Air and Space Museum, Steven F. Udvar-Hazy Center in Chantilly, Va.
RM
4009-V71393619
RM
6145-54457763
DN-ST-89-01992. Country: Unknown
RM
6183-58423195
Exploring the Depths of Modern Engineering: Inside a Massive Concrete Tunnel
RM
6145-45119737
Technicians with Orbital ATK, prime contractor for the Space Launch System (SLS) Booster, prepare the right hand aft skirt for NASAs SLS rocket for primer and painting inside a support building at the Hangar AF facility at Cape Canaveral Air Force Station in Florida. The space shuttle-era aft skirt, was inspected and resurfaced and will be primed and painted for use on the right hand booster of the SLS rocket for Exploration Mission 1 (EM-1). NASA is preparing for EM-1, deep-space missions, and the journey to Mars.
RM
6145-52293658
License construction of the General Dynamics F-16 at the Breeder Factories Schiphol.
RM
6145-58968794
The well deck of the USS Anchorage, which NASA and the Navy use for Orion recovery tests on Sept. 15, 2014, can be flooded with water to allow Orion to float in following its splashdown when it returns from space. Part of Batch image transfer from Flickr.
RM
6145-58961153
KENNEDY SPACE CENTER, FLA. - In the transfer aisle of the Vehicle Assembly Building, orbiter Discovery is lifted into the air by a 175-ton bridge crane. Discovery is being lifted to vertical for the remate with the new External Tank, ET-121, and Solid Rocket Boosters in high bay 3. That tank was originally scheduled to fly with Atlantis on the second Return to Flight mission, STS-121. A new heater was added to the tank's feedline bellows, part of the pipeline that carries the liquid oxygen to the orbiters main engines, to minimize the potential for ice and frost buildup. After the remate, technicians will work final closeouts on the fully assembled Space Shuttle stack, and perform liquid oxygen and liquid hydrogen electrical mates and an interface verification test. Discovery is currently scheduled to return to Launch Pad 39B on June 13.
RM
6145-45074841
CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, 23-foot cables used to hold a Bambi Bucket are checked out prior to a training exercise to practice firefighting techniques. A three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the centers Shuttle Landing Facility.Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport.
RM
6145-44507898
The P-1 truss, a component of the International Space Station, sits inside the Operations and Checkout Building where it will undergo processing. The truss, scheduled to fly in spring of 2002, is part of a total 10-truss, girder-like structure on the Station that will ultimately extend the length of a football field. Astronauts will attach the 14-by-15 foot structure to the port side of the center truss, S0, during the spring assembly flight. The 33,000-pound P-1 will house the thermal radiator rotating joint (TRRJ) that will rotate the Stations radiators away from the sun to increase their maximum cooling efficiency
RM
6145-44885784
CAPE CANAVERAL, Fla. -- A crane is used to lift the Orion ground test vehicle in the Operations and Checkout O&C Facility at NASA's Kennedy Space Center in Florida. The vehicle traveled more than 1,800 miles from the company's Waterton Facility near Denver where it successfully completed a series of rigorous tests that simulated launch and spaceflight environments. The ground test vehicle will be used for pathfinding operations in the O&C, including simulated manufacturing and assembly procedures. After those operations are completed, new backshell panels will be installed on the ground test vehicle at the O&C prior to the vehicles trek to NASA's Langley Research Center in Virginia for splashdown testing at the agency's Hydro Impact Basin.Launching atop NASA's heavy-lift Space Launch System SLS, which also is under development, the Orion Multi-Purpose Crew Vehicle MPCV will serve as the exploration vehicle that will carry astronaut crews beyond low Earth orbit. It also will provide
RM
6145-58965017
KENNEDY SPACE CENTER, Fla. -- An overhead crane in the Space Station Processing Facility moves the Integrated Cargo Carrier toward the payload canister (right). The ICC holds several payloads for mission STS-105, the Early Ammonia Servicer and two experiment containers. The ICC will join the Multi-Purpose Logistics Module Leonardo already in the payload canister for transport to Launch Pad 39A where they will be placed in the payload bay of Space Shuttle Discovery. Launch of STS-105 is scheduled for 5 38 p.m. EDT Aug. 9
RM
6177-V53474518
RM
442-41433
Exhibition of a female aircraft technician repairing a aircraft, Fleet Air Arm Museum, Royal Naval Air Station Yeovilton, Yeovil, Somerset, England
RM
6145-51422819
Jet Engine Mechanic Works on Engine. Jet Engine Mechanic Works on Engine. "Langley AFB, VaA jet engine mechanic assigned to the 316th Field Maintenance Squadron works on an engine." Photographer: Manuel A. Collaso
$40.00
Single Image Download High-Res or Vector
Get with Subscription
Looking for a license?
Click here, and we'll help you find it! Questions? Just ask!
DETAILS
Image Number: 1525R-55685Royalty FreeCredit Line:Ingram Publishing/SuperStockCollection:Ingram PublishingStory:Spacecraft and Rocket AssemblyModel Release:NoProperty Release:NoResolution:3570×5355
02A110FA
aeroplane|
aircraft|
airplane|
aviation|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|